Samick SG310 Owner's Manual - page 15
To select one of the groups follow the indications below:
-
Press and hold the [USB FILES] button
-
Using the
[/\][\/] buttons select one of the 2 available options.
When the desired option is selected the display will show only the USB files related to the type of
file selected until
the instrument is switched off.
At power up, the instrument will automatically restore the SMF song option.
USB FILES MODE SELECT
The files listed in the USB disk can be accessed in two ways: by number or by alphabet letters (you
can see the letters and the numbers above and below the VOICE section buttons).
It is possible in fact to access the files recalling their numbers or scrolling the initial letters.
To select these two systems follows these instructions.
-
Insert the USB disk in the USB socket
-
Press the USB FILES button
-
Press and hold the 0 (zero) on the numeric keypad until the display shows
Alphabet
or
Number
-
Using the [/\][\/] buttons select on the display Alphabet or Number as you prefer.
-
The available files will now be listed according to your choice, by number or by letters.
-
To select the files by numbers simply select the desired number on the display using the
numeric keypad indicated below the Voice buttons.
To select the sounds above 99, for example 123, press the number 1 button and hold it until
the number 1 appears on the display.
Press than the number 2 and the number 3 buttons to select the sound.
Sound number 123, is now selected.
-
To select the files by letters refer to the below table that is similar to telephone letter
indications:
1 – no letters
2 – ABC
3 – DEF
4 – GHI
5 – JKL
6 – MNO
7 – PQRS
8 – TUV
9 – WXYZ
-
To select the desired letter press the related button as follow:
D – press the 3 button one time. The display shows SEL D EF
R – press the 7 button 3 times. The display shows SEL PQR S
The files are now listed by initial letter. If the selected initial letter is not available in the list the
instrument will select the nearest available letter.
15