- DL manuals
- Samlexpower
- Inverter
- 100S-12A
- Instructions Manual
Samlexpower 100S-12A Instructions Manual
Summary of 100S-12A
Page 1
Pure sine wave dc to ac power inverter 60s-12a / 60s-24a 60s-12e / 60s-24e 100s-12a / 100s-24a 100s-12e / 100s-24e 150s-12a / 150s-24a 150s-12e / 150s-24e 200s-12a / 200s-24a 200s-12e / 200s-24e instruction manual.
Page 2
- p1 -.
Page 3
- p2 -.
Page 4
- p3 -.
Page 5
- p4 -.
Page 6
- p5 -.
Page 7
- p6 -.
Page 8
- p7 -.
Page 9
- p8 -.
Page 10
- p9 -.
Page 11: Contents
Sine wave inverter please read this manual carefully before installing and starting up and store it in a safe place. If the device is resold, this instruction manual must be handed over to the purchaser along with the device. Contents 1 notes on using the instruction manual. . . . . . . . . . . . . ...
Page 12
Notes on using the instruction manual sine wave inverter 1 notes on using the instruction manual caution! Safety instruction, failure to observe this instruction can cause material damage and impair the function of the device. Supplementary information for operating the device. Caution! Safety instr...
Page 13: For Installation On Boats
Sine wave inverter general safety instructions use the device only as intended. Do not operate the device in a damp or wet environment. Do not operate the device in areas that are potentially explosive. Maintenance and repair work must only be carried out by qualified per- sonnel who are familiar wi...
Page 14: Quantity Description
Scope of delivery sine wave inverter caution! Note the following basic safety information when using electrical devices: – electric shock – fire hazard – injury operate the device only if you are certain that the housing and the cables are undamaged. Make sure the air inlets and outlets of the devic...
Page 15: 6.1 Tools Required
Sine wave inverter technical description 5 technical description the inverters can be operated wherever there is a 12 v dc supply (60s- 12a/e, 100s-12a/e, 150s-12a/e, 200s-12a/e) or a 24 v dc supply (60s- 24a/e, 100s-24a/e, 150s-24a/e, 200s-24a/e). With its low weight and the compact design, the inv...
Page 16
Installing the inverter sine wave inverter for making and testing the electrical connection the following tools are required: crimping tool 3 different flexible cable connections. The required cable diameter can be taken from the table in the section „connecting the inverter“ on page 16. Various ter...
Page 17
Sine wave lnverter connecting the inverter 6.3 installing the inverter adjust the inverter to the chosen installation place and mark the fixing points. Fix the inverter by using the self-chosen fixing method. 7 connecting the inverter 7.1 general instructions in case the inverter is installed into v...
Page 18
Using the inverter sine wave lnverter inches of the battery. Connect the positive cable to the red positive terminal. Warning! In order for the integrated residual current-operated protective device of the 60s-12a/e, 60s-24a/e, 100s-12a/e, 100s-24a/e, 150s-12a/e, 150s-24a/e, 200s-12a/e and 200s-24a/...
Page 19
Sine wave lnverter using the inverter 150s-24a/e, 200s-24a/e), the over-load“ led (fig. 1.3, page 1 / fig. 10.4, page 5) illuminates and an audible signal is given. The inverter shuts down automatically in case of a battery voltage down to 10 v resp. 20 v. If the device overheats, the inverter shuts...
Page 20: 9 Rectifying Faults
Rectifying faults sine wave lnverter 9 rectifying faults - p19 - fault cause remedy no output voltage, led not illuminated bad connection between battery and inverter. Internal fuses defect. Check the cables and contact in this case send the unit back to supplier. No output voltage, over- temp led i...
Page 21: Caution!
Sine wave lnverter cleaning and caring for the inverter 10 cleaning and caring for the inverter caution! Do not use sharp or hard objects for cleaning as these may damage the device. Occasionally clean the device with a damp cloth. 11 guarantee our general guarantee conditions apply. If the product ...
Page 22: 13 Technical Data
Technical data sine wave lnverter 13 technical data 600w pure sine wave inverter - p21 - item number 60s-12e 60s-24e 60s-12a 60s-24a rated input voltage 12 v dc 24 v dc 12 v dc 24 v dc constant output power 600 w peak output power (a max. Of 10 min.) 1000 w (650 w) maximum input current 80a 40a 80a ...
Page 23: 13 Technical Data
Sine wave lnverter technical data 13 technical data 1000w pure sine wave inverter - p22- item number 100s-12e 100s-24e 100s-12a 100s-24a rated input voltage 12 v dc 24 v dc 12 v dc 24 v dc constant output power 1000 w peak output power (a max. Of 10 min.) 2000 w (1200 w) maximum input current 160a 8...
Page 24: 13 Technical Data
Technical data sine wave lnverter 13 technical data 1500w pure sine wave inverter - p23- item number 150s-12e 150s-24e 150s-12a 150s-24a rated input voltage 12 v dc 24 v dc 12 v dc 24 v dc constant output power 1500 w peak output power (a max. Of 10 min.) 3000 w (1800 w) maximum input current 200a 1...
Page 25
Sine wave lnverter technical data 13 technical data 2000w pure sine wave inverter - p24- item number 200s-12e 200s-24e 200s-12a 200s-24a rated input voltage 12 v dc 24 v dc 12 v dc 24 v dc constant output power 2000 w peak output power (a max. Of 10 min.) 4000 w (2200 w) maximum input current 240a 1...
Page 26
902si200000005.