Samlexpower SEC - 1215A Owner's Manual - page 4
ABOUT THE CABLES:
Cable routing and installation information
n
If cables have to be inserted through metal walls or other sharp-edged material, use a cable duct or
cable bushing
n
Do not lay cables loose or with sharp bends on electrically conductive materials (metal).
n
Secure the cables properly.
n
Lay cables in such a way that no one can trip over them.
n
Lay cables in such a way that they are not exposed to the risk of damage.
n
Do not lay 120V or 230V main cable and 12V/24V DC cable together in the same duct.
n
The specified minimum cross-section must be complied with.
n
Do not pull cables.
INTENDED USE
The use of a high efficiency Pulse Width Modulation Switching Controller makes the installation-friendly Samlex
charger very small, light and powerful. Together with the mechanical strength, over temp. and short circuit
protections, ensure high operating safety. Because of these features, the charger is ideal for mobile uses in motor
homes, on board motor or sailing yachts or in ambulances and emergency rescue vehicles.
n
Small, light and robust in design and manufacture.
n
Fully automatic Connect and Forget operation
n
Output current limiting and short circuit shutdown.
n
Easy installation by brackets on the housing.
n
3 stage characteristic for rapid and complete battery charging.
n
3 bank charging (3 positive + terminals)
n
Monitoring through ON status LED and Ammeter
n
Cooling by temperature controlled fan (SEC-1230A & SEC-2415A)
SAMLEX CHARGER FEATURES
Page 2