Samson 3222/2780 series Mounting And Operating Instructions - page 37
EB 5866 EN
37
SAMSON AKTIENGESELLSCHAFT
Weismüllerstraße 3 60314 Frankfurt am Main
Telefon: 069 4009-0 · Telefax: 069 4009-1507
E-Mail: samson@samson.de
Revison 01
Modul/Module H / N° CE-PED-H-SAM 001-13-DEU
SAMSON erklärt in alleiniger Verantwortung für folgende Typen / explaines in sole resposibility for the following products:
Ventile für elektrische Stellgeräte / Globe and three-way valves equipped with electric actuators
Typ / Type 3213, 3222 (Erz.-Nr. / Model No.. 2710); 3323, 3535 (2803); 3213, 3531 (2811); 3214 (2814); 2423E (2823); 241 (3241); 244
(3244); 267 (3267);
die Konformität mit nachfolgender Anforderung / the conformity with the following requirement.
Richtlinie des Europäischen Parlaments und des Rates zur Harmonisierung der Rechtsvorschriften
der Mitgliedstaaten über die Bereitstellung von Druckgeräten auf dem Markt (siehe auch Artikel 41
und 48).
2014/68/EU
vom 15.05.2014
Directive of the European Parliament and oft the Council on the harmonisation of the laws of the
Member States relating of the making available on the market of pressure equipment (see also Article
41 and 48).
2014/68/EU
of
15.05.2014
Angewandtes Konformitätsbewertungsverfahren für Fluide nach Art. 4 Abs.1 Pkt. c.i erster
Gedankenstrich.
Modul siehe
Tabelle
durch
certified by
Bureau Veritas
S. A. (0062)
Conformity assessment procedure applied for fluids according to Article 4, Section 1, Subsection c.i,
first indent.
For type of mo-
dule, see table
Nenndruck Nominal
pressure
DN
NPS
15
½
20
¾
25
1
32
1¼
40
1½
50
2
65
-
80
3
100
4
125
-
150
6
200
8
250
10
300
12
400
16
PN 25
ohne (1) A
(2)
H
-
PN 40
ohne (1)
H
-
Class 150
ohne (1) A
(2)
H
-
Class 300
ohne (1)
H
-
(1) Das auf dem Stellgerät aufgebrachte CE-Zeichen hat keine Gültigkeit im Sinne der Druckgeräterichtlinie
The CE marking affixed to the control device does not refer to the Pressure Equipment Directive.
(2) Das auf dem Stellgerät aufgebrachte CE-Zeichen gilt ohne Bezeichnung der Notifizierten Stelle (Kennr. 0062)
The CE marking affixed to the control device is valid, but does not refer to the notified body (ID No. is invalid).
Geräte, denen laut Tabelle das Konformitätsbewertungsverfahren Modul H zugrunde liegt, beziehen sich auf die
„Zulassungsbescheinigung eines Qualitätssicherungssystems“ ausgestellt durch die Notifizierte Stelle.
The module H conformity assessment procedure applied to the valves according to the table is based on the “Certificate of
Quality System Approval” issued by the notified body.
Dem Entwurf zu Grunde gelegt sind Verfahren aus: / The design is based on the methods of:
DIN EN 12516-2, DIN EN 12516-3 bzw. / respectively ASME B16.24, ASME B16.34, ASME B16.42
Das Qualitätssicherungssystem des Herstellers wird von folgender benannter Stelle überwacht
The Manufactur`s Quality Assurance System is monitored by following Notifed Body
Bureau Veritas S.A. nr 0062 67/71, boulevard du Chateau, 92200 Neuilly-sur-Seine, France
Hersteller / Manufacturer: SAMSON AG / Weismüllerstraße 3 / 60314 Frankfurt
Frankfurt am Main, den 19.07.2016
Klaus Hörschken
Günther Scherer
Zentralabteilungsleiter / Head of Central Department
Zentralabteilungsleiter / Head of Central Department
Entwicklung Ventile und Antriebe / Development Valves and Actuators
Total Quality Management / Total Quality Management
ce
_m
od
ul
_h
_u
nd
_a
_d
e_e
n_r
ev
01
.d
oc
x