Samson 3271 Mounting And Operating Instructions - page 5
EB 8310-8 EN
5
Safety instructions and measures
1 Safety instructions and measures
Intended use
The SAMSON Type 3271 Actuator is designed for operating a mounted globe valve. In com-
bination with the valve, the actuator is used to shut off the flow of liquids, gases or vapors in
the pipeline. Depending on the version, the actuator is suitable for throttling or on/off ser-
vice. The actuator can be used in processing and industrial plants.
The actuator is designed to operate under exactly defined conditions (e.g. thrust, travel).
Therefore, operators must ensure that the actuator is only used in applications that meet the
specifications used for sizing the actuator at the ordering stage. In case operators intend to
use the actuator in other applications or conditions than specified, contact SAMSON.
SAMSON does not assume any liability for damage resulting from the failure to use the de-
vice for its intended purpose or for damage caused by external forces or any other external
factors.
Î
Refer to the technical data and nameplate for limits and fields of application as well as
possible uses.
Reasonably foreseeable misuse
The actuator is not suitable for the following applications:
−
Use outside the limits defined during sizing and in the technical data
−
Use outside the limits defined by the accessories mounted on the actuator
Furthermore, the following activities do not comply with the intended use:
−
Use of non-original spare parts
−
Performing service and repair work not described in these instructions
Qualifications of operating personnel
The actuator must be mounted, started up, serviced, and repaired by fully trained and quali-
fied personnel only; the accepted industry codes and practices are to be observed. Accord-
ing to these mounting and operating instructions, trained personnel refers to individuals who
are able to judge the work they are assigned to and recognize possible hazards due to their
specialized training, their knowledge and experience as well as their knowledge of the appli-
cable standards.