Samson TCM-3 Instruction Manual - page 5
When AF/REG switching mode is selected, the radio checks the signal strength of the AF all
the time. When press long, it is activated as regional mode ON/OFF.
-Regional mode ON:
AF switching or PI SEEK is implemented to the station which have all PI codes same as
current station. REG segment is turned on in LCD display.
-Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is
implemented.
6. BAND BUTTON(BND)
Each band is toggled cyclically by pressing this key FM1-FM2-FM3-MW1-MW2.
7. AUTO SEEK SEARCH TUNING(AS/PS)
By pressing shortly, the radio searches for each preset Station.
When field strength level is bigger than the threshold level of stop level, the radio is holding at
that preset number for5 secretary.
With releasing mute, and then searches again.
By pressing longer than 1sec,and then 6 strongest stations are preset to the corresponding
preset number.
When AS operation is finished, the radio executes the preset scan.
8.9. AUTOMATIC OR MANUAL TUNING(FREQ UP : OR FREQ DOWN 9 )
(A) RADIO MODE
When press short, these keys are operated as MANUAL tuning mode.
When press longer than 1 sec., they are operated as SEEK tuning mode.
(B) CD/MP3/WMA/SD/MMC/USB PLAYER MODE
When press short, they are operated as TRACK UP/DOWN mode.
When press longer than 1 secretary., they are operated as CUE or REVIEW mode.
10. CD EJECT BUTTON
Press the EJECT button(10) to remove the CD.
11. CD SLOT
12. LCD DISPLAY
The liquid Crystal Display will display the current state of the unit.
13. PAUSE BUTTON
During PLAY mode, press PAUSE button(18) to PAUSE .
Press it again to resume play.
14. INTRO BUTTON(Preview all Tracks)
When this button (19) is pressed, INT indication is displayed and the first several seconds of