Sentry Camera TPO4-380 Operational Manual
Copyright © 2009. All Rights Reserved.
1
REV072909
TPO4-380
TPO4-380P
Operational Manual
Auto Tracking PIR Camera
Not recommended for installation where water/rain may enter the
camera from the back side. It is best to install under a canopy.
// FEATURES ...
• Three dual-element PIR sensors
• Latest dual thermostat protection PIR sensors
• Three surveillance modes: Tracks & follows objects; Fixed
surveillance on specified area; Regular panning scan of
surveillance area
• Anti-tamper switch: normal close
• Built-in relay out video trigger for DVR or Alarm
• Tamper proof
• This design can be used in conjunction with conventional PIR
Security Systems
• IP44 Rating
• 12V DC, 500mA
▲ Must use the provided Blutac or silicone for prevention of water
from entering into the camera on the back side. There is no
warranty for this type of water damage.
// LENS COVERAGE AREA ...
Horizontal Coverage
Triple sensor wide area coverage.
Vertical Coverage
Recommended installation
Height: 7.87~10.5ft / 2.4~3.2m
// PARTS & FUNCTIONS ...
(1) Mount Hole x3
(8) LED Indicator
(2) Function Selector
(9) Bottom Dust Cover
(3) Relay
(10) Top Dust Cover
(4) Position Selector
(11) Terminal Block
(5) Camera
(12) Cable Access
(6) PIR Sensor x3
(13) Tamer Switch
(7) Locking Screw
(14) DC Jack
// INSTALLATION PRECAUTIONS ...
Read the following guidelines thoroughly before beginning the
installation process.
Please read the Manual & Cautions section
before attempting to use this product.
Ensure the camera is free of
obstructions and in clear view
of coverage area. Do not
install where the camera is in
or facing direct/reflected
sunlight windows.
Install the camera across the
coverage zone to ensure
maximum detection sensitivity.
Avoid locating the camera
near equipment that may
change the surrounding
temperature (i.e. overhead
A/C vent).
Install the camera at the
recommended height on a
solid flat surface.