Serene S2022 Operating Instructions Manual - page 10
12
Serene S2022/3
Heating panel
Cleaning
The heater requires regular cleaning to ensure trouble free operation.
Isolate the heater from the mains power supply.
Use a damp cloth to clean the exterior of the heater.
Do not use any abrasive cleaners.
Use a vacuum cleaner to remove dust and fluff visible on the heater
inlet and outlet grilles.
Ensure the heater is dry before turning the mains power supply to the
heater back on
Wall Mounting Instructions
The heater is fixed on the wall with the mounting bracket attached to
back of the heater.
To secure mounting bracket to the wall
1. Remove the wall mounting bracket from the back of the heater, by
compressing the fittings at the top and/or sides of the bracket, which
clip into the heater body (see figure 2 below).
2. Place the mounting bracket against the wall, ensuring the bracket is
level and the minimum distance between the heater and the adjacent
surfaces are adhered to .
3 .Mark and drill the fixing holes at the top and bottom of the
mounting bracket, and attached to the wall with suitable screws
and/or wall anchors).
4. Locate the heater over the bottom clips of the wall bracket and then
push the heater securely into the fittings on the top and/or sides of
the bracket.