SeriPrint SP25 VDE Operator's Manual - Safety Information
6
SP25VDE OM 2.0-1(2006)
SAFETY INFORMATION
When using your equipment, the following safety precautions should always be
followed.
Safety During Operation
WARNING:
Indicates a potentially hazardous situation which, if instructions
are not followed, could result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if in-
structions are not followed, may result in minor or mod-
erate injury or damage to property.
WARNING:
•
Connect the power cord directly into a wall outlet and never use an extension cord.
•
Disconnect the power plug by pulling the plug, not the cable.
•
Only connect the machine to the power source described in the Specifications on
page 5 of this manual. Connect the power cord directly into a wall outlet and do not
use an extension cord.
•
Do not damage, break or make any modifications to the power cord. Do not place
heavy objects on it. Do not pull it hard nor bend it. These actions could cause an
electric shock or fire.
•
Do not modify or replace any parts other than the ones specified in this manual
•
Since some parts of the machine are supplied with high voltage, touch only the parts
specified in this manual.
•
To avoid hazardous electric shock, do not remove any covers or screws other than
those specified in this manual.
•
Do not operate the machine without covers.
•
Turn off the power and disconnect the power plug (by pulling the plug, not the
cable) if any of the following conditions exists:
•
Something is spilled into or on the equipment
•
You suspect your equipment needs service or repair.
•
Your equipment’s cover has been damaged.
•
Do not leave machine unattended while printing is in progress.
•
Do not operate the machine when it is not connected to a Digital Duplicator.
•
Only attach to the specified Digital Duplicators listed on page 5.
•
UV light is hazardous. Use equipment in accordance with the operation manual.
•
Do not remove any covers. No USER servicable parts inside.