Serpent Pool Cleaning System Operating Instructions Manual

Summary of Pool Cleaning System

  • Page 1

    Serpent pool cleaning system™ limited warranty terms & conditions 3 year warranty coverage, exclusions apply before using the cleaner, review the owner’s manual completely. Failure to read the owner’s manual completely could result in pool damage caused by an improper installation of the cleaner. Th...

  • Page 2

    ⚠​ warnings and safety information general information ⚠ suction hazards and drowning risks ⚠ ​ if your pool is equipped with one, ​you must cover your dedicated suction port/vac port/automatic pool cleaner port​ when not in use by the cleaner. ⚠ ​ do not play with cleaner or apply cleaner or hose t...

  • Page 3

    Tips for usage assembly instructions this pool cleaner was made to assist you in keeping your pool clean and well-maintained in the easiest way possible. Here are ten important tips: 1. Once installed, your cleaner is designed to run for 4-6 hours and should be able to clean an average sized pool in...

  • Page 4

    Assembly instructions assembly instructions cleaner body assembly: 1. Insert both ​wings into the cleaner body, right into side with r, left into the side with l. Push the wing in until it slides over the tab. 2. Attach the ​skirt pad to the bottom lip of the cleaner by sliding it around and over th...

  • Page 5

    In-pool installation in-pool installation in-pool installation: 1. Make sure the pool is generally clean, free from debris, and the entire pump and filtration system is clean. Empty your skimmer and pump baskets. Troubleshooting tip: if your cleaner does not have enough power, stays in one area, or ...

  • Page 6

    In-pool installation in-pool installation 4. Adjust your valve(s) to allow for proper suction to cleaner if you are plugging the cleaner into the wall. Troubleshooting tip: if your cleaner is not covering the whole pool, stays in one area, or does not clean well enough, adjust your valves. 5. If you...