SERVIS DN61039SS User Manual - Setting Up Your Dishwasher
21
22
T: 0800 0124 382
T: 0800 0124 382
To use the settings menu:
1
Switch on your Dishwasher.
2
On the control panel hold down the Option and Delay buttons together for 3 seconds. You
will see ‘Settings Menu’ on the display.
3
Use the Up and Down button to select the required option.
Press the Confirmation button to access the option settings.
Use the Up or Down buttons to select the required setting.
Press the Confirmation button to save the setting.
Use the Down button to select ‘7 Exit Menu’.
Press the Confirmation button to exit the settings menu.
SETTING UP YOUR DISHWASHER
1
Language
Sets the language used to display messages on the control
panel. When you first receive the Dishwasher the language is
set to English, but you can change it to any one of the following:
Croatian, Czech, Dansk, Deutsch, Finnish, French, Greek,
Hungarian, Italian, Nederlands, Norwegian, Polish, Portuguese,
Russian, Slovene, Spanish, Swedish, Turkish.
To reset the language to English at any time, use this setting or
setting ‘6 Factory Settings’.
2
Water Hardness
See page 20.
3
Volume
Adjusts the volume of the Dishwasher’s alarms. You can select
from L1 (quietest) to L3 (loudest).
4
Brightness
Adjusts the brightness of the control panel display. You can
select from L1 (darkest) to L3 (brightest).
5
Ecomode
Minimises the brightness of the control panel display after 30
seconds of non-operation to save energy. The available options
are Yes or No.
6
Factory Settings
Discards any setting changes you have made and resets the
Dishwasher to the factory settings.
7
Exit Menu
Exits the settings menu.
Settings Menu
4
5
6
7
8
Settings Menu