Important: please read this operation manual before operating the equipment. Waterproof 19" high-definition liquid crystal television user manual 19” tft-lcd television model: s-1913-19.1-hy.1.
2 thank you for purchasing hydra™ waterproof 19" tft-lcd television. Please take the time to read this manual for the best performance of your new television. To enjoy the features of this unit and ensure years of trouble-free operation, please make sure to carefully follow instructions. Please keep...
3 safety instructions to reduce the risk of fire, electrical shock and other injuries, keep these safety precautions in mind when installing, using, and maintaining your tv. The socket- outlet should be installed near the equipment and be easily accessible. The tv should be connected to a grounded m...
4 chapter 1 set up 1-1 in the box .................................................. 7 1-2 parts ........................................................... 8 1-3 terminals ................................................... 9 1-4 installation............................................... 10 1-5 re...
5 chapter 3 menu 3-1 the menu system .................................... 30 3-2 video menu.............................................. 31 3-3 audio menu ............................................. 39 3-4 tv menu ................................................... 41 3-5 setup menu ................
6 1-1 in the box 1-2 parts 1-3 terminals 1-4 installation 1-5 remote control 1-6 insert remote control batteries 1-7 menu controls on remote 1-8 menu configuration 1-9 basic operation 1 set up.
7 please make sure the following items are included: hydra™ waterproof lcd product: 1) back box 2) tv assembly waterproof sealant 20 ft low-voltage power cord, cl2r power supply brick: 110-240v standard usa-a type plug waterproof remote control with battery mounting hardware user manual 1-1 in the b...
8 1-2 parts 2) tv assembly 1) back box input/output/low voltage pass-through port top top bottom bottom framing member screw- mounting slots (4, 2 per side) framing member screw-mounting slots (4) low voltage power location on-unit control buttons glass face gravity lock guide slots (4) gravity lock...
9 on-unit control buttons 1.3 terminals 15 pin vga input dtv/antenna pc audio in (blue) pc audio out (green) composite s-video component input rgb rs 232 input hdmi input dc power input 2 channel amplified speaker out 5’ ir lead with 3.5 mm male connector b o t to m glass face 1) back box note: this...
10 1-4 installation step 1 install back box in unfinished wall to framing members using the provided four screws and washers through screw-mounting slots in back box. Ensure that the front of the box will be flush with finished wall when installed. Feed power and other desired cords through pass-thr...
11 step 2 while keeping cord ends outside the back box pass-through port, finish the wall tight to the edges of back box, removing any gap. Once complete, the final wall surface should be flush with the front edge of the back box as shown. 1) back box maintain cords in pass- through port during wall...
12 recessed input/output/ low voltage location back box is screw mounted into framing members glass face 1/8” bead (excess sealant should seep out on all edges when fully engaged) 1) tv assembly step 3 install tv assembly: a) place tv assembly face down on a clean, dry surface near the installed bac...
13 pass- through port low voltage power cable 2) back box note: immediately after tv assembly is installed and sealed, verify functionality of lcd and remote. If operation has been compromised by the installation, corrections can easily be made until the sealant has cured..
14 step 4 allow waterproof sealant 24 hours to cure at 72 degrees fahrenheit before exposing to moisture. (or recommended time designated by sealant instructions) once fully cured, use a razor blade or utility knife to remove excess sealant. Finished wall wall board framing member note: glass face- ...
15 power on/off, standby tv & input source selection button display button menu control center sleep timer button zoom button electronic program guide button mute button number selection buttons channel control buttons volume control buttons enter button 1 2 3 4 5 6 7 8 9 10 11 12 9 5 6 8 7 12 10 11...
16 power power on/off, standby source select input source display display current program details menu display and edit menu screen exit exit current screen arrows (3456) control menu options ok confirm selection sleep set sleep timer zoom zoom current picture epg view available electronic program g...
17 remove the battery cover on the back of the remote using the tool included or a coin. Open compartment and remove battery and safety tab. Discard plastic safety tab. Reinsert the battery, positive side out (the side with writing facing out). Ensure waterproof ring is securely in place before retu...
18 press menu button on the remote control to display main menu. 1-7 menu controls on remote press menu control arrow buttons to navigate through menus. Use the right arrow (4) to move to sub menu of a selected main menu. Press exit button to return from sub menu to main menu or from main menu to me...
19 press menu to open the menu window. Navigate using 5 or 6 to select the desired menu. Press 4 or ok to enter the menu. Use 5 or 6 within the selected menu to navigate to a submenu or setting to adjust. Press 4 or ok to enter the submenu or use 3 or 4 to adjust selected setting. Press exit at any ...
20 power on / off press the power / standby button on the remote control or on the side panel to turn on the unit. Press power / standby button on the remote control or on the side panel again to return the display to standby (off) mode. Selection of input mode press the source button to display the...
21 2-1 preparation 2-2 connecting power 2-3 connecting tv antenna 2-4 connecting video / s-video 2-5 connecting hdmi 2-6 connecting pc 2-7 connecting rs-232c pc control 2-8 connecting lineout (external speaker) 2 connection.
22 before connecting your tv to external equipment, please read to following instructions. Before connection please read the relevant external equipment operation manual (dvd player, etc.) carefully before making connections. Whenever you connect an external audio or video system to your tv, ensure ...
23 2-3 connecting tv antenna connect rf cable to tv & input connector with an outdoor or wall outlet antenna output. • for watching analog tv, connect wall outlet with [cable] input. • for watching digital tv, connect wall outlet with [antenna] input. Turn on the tv after all connections. Watching a...
24 connect video/audio cable and s-video cable to video port of the tv and camcorder, gaming consoles, vcr, dvd player or set-top box. Video & s-video use same audio line, so if two types of external equipment are connected with video & s-video, audio will only be available for one type of the conne...
25 2-5 connecting hdmi connect hdmi cable to hdmi port of tv and dvd player, vcr, set-top box or camcorder. 2-6 connecting pc monitor connect 15-pin cable to 15-pin port on the tv and pc. Connect audio cable to audio output of a pc (stereo jack) and pc audio input port of the tv. Note: d-sub & stere...
26 2-7 connecting rs-232c pc control command table commands not indicated here are not guaranteed to operate control item command parameter control contents power on command setting r s p w 0 _ _ _ off the power on command rejected 1 _ _ _ on the power on command accepted power setting p o w r 0 _ _...
27 command table commands not indicated here are not guaranteed to operate control item command parameter control contents power on command setting r s p w 0 _ _ _ off the power on command rejected 1 _ _ _ on the power on command accepted power setting p o w r 0 _ _ _ power off it shifts to standby ...
28 2-9 connecting audio lineout wire input detail view eurotype degson speaker connector 2-channel: • left channel • right channel connect component cable to component ports of tv and dvd player, vcr, set-top box or camcorder. Note: component and audio cables are not included. 2-8 connecting dvd sou...
29 3-1 the menu system 3-2 video menu 3-3 audio menu 3-4 tv menu 3-5 setup menu 3-6 parental menu 3 menu.
30 after you have installed the battery in the remote control, you may want to set some preferences on the lcd using the menu system. • the buttons for on-screen display (osd) option adjustment include menu, 3, 4, 5 , 6, ok or enter and exit buttons. • press menu to open the osd menu then press 5 or...
31 3-2 video menu whether adjusting for the first time, or editing current picture settings, it is recommended to start with the following settings: brightness: + 51 contrast: +68 hue: -19 color temperature: cool these settings maximize lcd picture for optimal performance through the mirror glass. T...
32 adjustment of “saturation” (inactive for vga) 1) press menu for the “video” menu to appear 2) press 4 or ok to select the “video” menu 3) press 5 or 6 to highlight your selection 4) press 3 or 4 to adjust 5) press menu or exit to return or exit menu mode adjustment of “brightness” or “contrast” 1...
33 adjustment of “sharpness” (inactive for vga) 1) press menu for the “video” menu to appear 2) press 4 or ok to select the “video” menu 3) press 5 or 6 to highlight your selection 4) press 3 or 4 to adjust 5) press menu or exit to return or exit menu mode adjustment of “hue” (only for ntsc) 1) pres...
34 selection of “color temperature” 1) press menu for the “video” menu to appear 2) press 4 or ok to select the “video” menu 3) press 5 or 6 to highlight your selection 4) press 4 or ok to enter the sub-menu 5) press 3 or 4 button to select one of “cool”, “standard”, “warm” or “user” for balance of ...
35 selection of “advanced video” (inactive for vga ) 1) press menu for the “video” menu to appear 2) press 4 or ok to select the “video” menu 3) press 5 or 6 to highlight your selection 4) press 4 or ok to enter the sub-menu 5) press 5 or 6 to highlight your selection 4) press 3 or 4 to select 5) pr...
36 table of video adjustment settings item status description dnr off, low, medium, selecting to control the strong sharpness and noise reduction black level on, off darkens soft blacks, may darken other extender dark colors, creating a “crush” effect white peak on, off volume boost without distorti...
37 selection of “vga” (only for vga) 1) press menu for the “video” menu to appear. 2) press 4 or ok to select the “video” menu. 3) press 5 or 6 to highlight your selection. 4) press 4 or ok to enter the sub-menu. Selection of “auto adjust” after entering the “vga” menu 1) press 5 or 6 to highlight y...
38 table of display adjustment settings item description h. Position use 5 or 6 to select “h. Position” use 3 or 4 to move the image left or right v. Position use 5 or 6 to select “v. Position” use 3 or 4 to move the image up or down phase use 5 or 6 to select “phase” use 3 or 4 to adjust clock use ...
39 adjustment of “balance”, “bass” or “treble” 1) press menu, then press 6 for the “audio” menu to appear. 2) press 4 or ok to select the “audio” menu. 3) press 5 or 6 to highlight your selection. 4) press 3 or 4 to adjust. 5) press menu or exit to return or exit menu mode 3-3 audio menu.
40
41 3-4 tv menu specifying “tuner mode” 1) press menu, then press 6 until the “tv” menu appears 2) press 4 or ok to select the “tv” menu 3) press 5 or 6 to highlight your selection 4) press 3 or 4 to select “cable” or “antenna” 5) press menu or exit to return or exit menu mode.
42 using the “channel scan” 1) press menu, then press 6 until the “tv” menu appears 2) press 4 or ok to enter the “tv” menu 3) press 5 or 6 to highlight your selection 4) press 4 or ok to start searching the channels that are found will save automatically 5) if you want to stop searching, press menu...
43 using the “channel skip” 1) press menu, then press 6 until the “tv” menu appears 2) press 4 or ok to enter the “tv” menu 3) press 5 or 6 to highlight your selection 4) press 4 or ok to enter the sub-menu 5) press 5 or 6 to choose an item, then press ok to confirm or cancel your selection 6) when ...
44 selecting channel 1) press the channel control buttons (v ) button to search the channels — the channel number will increase or decrease, excluding skipped channels. 2) press numbered buttons 0~9 to select the channel you want. If the channel number is bigger than 9, press the two number buttons ...
45 using the guide (electronic program guide) your tv has an “electronic program guide” to help you navigate through all the television shows. The guide menu supplies information, such as program lists, and the start and end times of available channels. In addition, detailed information about the pr...
46 3-5 setup menu selection of “osd language” 1) press menu, then press 6 until the “setup” menu appears. 2) press 4 or ok to select the “setup” menu. 3) press 5 or 6 to highlight your selection. 4) press 3 or 4 to select “english”, “español” or “français”. 5) press menu or exit to return or exit me...
47 using the “time setup” menu 1) press menu, then press 6 until the “setup” menu appears. 2) press 4 or ok to select the “setup” menu. 3) press 5 or 6 to highlight your selection. 4) press 4 or ok to enter the sub-menu. 5) press 3 or 4 to choose “time zone”, “time” or “sleep timer”. 6) press menu o...
48 selection of “time zone” after entering the “time setup” menu 1) press 5 or 6 to highlight your selection. 2) press 3 or 4 to select “hawaii”, “eastern time”, “indiana”, “central time”, “mountain time”, “arizona”, “pacific time” or “alaska”. 3) press menu or exit to return or exit menu mode selec...
49 after entering the “time” menu 1) press 5 or 6 to highlight your selection. 2) press 3 or 4 button to select. 3) press numbered buttons to set the “date”, “time”, “power on timer” or “power off timer”. 4) press menu or exit to return or exit menu mode note: • pressing the standby button to turn o...
50 selection of “sleep timer” after entering the “time setup” menu 1) press 5 or 6 to highlight your selection. 2) press 3 or 4 to select “10”, “20”, “30”, “40”, “50”, “60”, “90”, “120”, “180”, “240”, minutes or off”. 3) press menu or exit to return or exit menu mode 10 40 90 240 30 60 180 20 50 120...
51 to use closed caption (only for tv, av, s-video) 1) press menu, then press 6 until the “setup” menu appears. 2) press 4 or ok to select the “setup” menu. 3) press 5 or 6 to highlight your selection. 4) press 4 or ok to enter the sub-menu. 5) press menu or exit to return or exit menu mode selectio...
52 the analog closed caption features have two options • captions an on-screen display of the dialogue, narration, and sound effects of the tv programs and videos that are closed captioned (usually marked as “c/c” in tv listings. • text an on-screen display of information not related to the current ...
53 selection of “digital closed caption” after entering the “caption” menu 1) press 5 or 6 to highlight your selection. 2) press 3 or 4 to select “service 1”, “service 2”, “service 3”, “service 4”, “service 5”, “service 6” or “off”. Selection of “digital caption style” after entering the “caption” m...
54 to “reset default” to the factory settings 1) press menu, then press 6 until the “setup” menu appears. 2) press 4 or ok to select the “setup” menu. 3) press 5 or 6 to highlight your selection. 4) press 4 or ok to open the pop-up menu 5) press 3 or 4 to select “ok” or “cancel”. Ok to reset default...
55 some programs and movies include signals that classify the content of the program (dialog, language, sex, violence). The “parental” control feature in this detects these signals and blocks the programs according to your selections. To use this feature, perform the following. Parental control only...
56 if the password you entered is invalid, a message will pop up as shown..
57 using the “change password” item 1) after entering the “parental” menu, press 5 or 6 to highlight the “change password” item. 2) press 4 or ok to confirm. 3) use 0~9 buttons input your new password in the “new password” blank. 4) use 0~9 buttons input your new password again in the “confirm passw...
58 using the “program block” item 1) after entering the “parental” menu, press 5 or 6 to highlight the “program block” item. 2) press 4 or ok to enter 3) press menu or exit to return or exit menu mode using the “rating enable” item 1) after entering the “program block” menu, press 5 or 6 to highligh...
59 using the ratings items 1) after entering the “program block” menu, press 5 or 6 to highlight a ratings item (category options are listed on the following page) 2) press 4 or ok to enter 3) press 5, 6, 3, or 4 to select an item, then press ok to lock (display “ ”) or unlock (display “ ”)..
60 u.S. Tv ratings (including made-for-tv movies) children tv ratings tv-y youth (individual content categories do not apply) tv-y7 youth, 7 years and older general tv ratings tv-g general audience (individual categories do not apply) tv-pg parental guidance suggested tv-14 14 years and older tv-ma ...
61 unlocking programs temporarily if you try to watch a program that exceeds the restrictions you specified, the system enters program lock mode. You can either unlock the program temporarily by entering your password, or select a non-locked program to watch. To temporarily unlock the program, press...
62 4-1 specifications 4 specifications.
63 4-1 specifications display features display technology tft-lcd screen size 19" format 16:9 brightness 450 cd/m2 viewing angle 160°(h/v) contrast 700:1 response time 6ms support resolution 1440 x 900 maximum colors 16.2m dot pitch 0.285mm(h) x 0.285mm(v) panel life 50000hrs osd language english, f...
64 input and output terminals rf 75ohms coaxial antenna x 1 av (composite) rca 75ohms composite video x 1 & audio l, audio r (rca plugs) component y, pb, and pr (rca plugs) x 1 s-video 4-pin din x 1 vga 15-pin d-sub female x1 hdmi 480i, 480p, 576i, 576p, 720p and 1080i rs232 9-pin db9 female x 1 aud...
65 5-1 troubleshooting 5 troubleshooting.
66 5-1 troubleshooting before contacting service personnel, please read the following information. If you still experience problems, contact your local dealer or qualified service personnel. Unclear display or noisy sound check whether tv antenna is correctly connected. Broadcasting may not be good ...
67 no image on the monitor check whether the d-sub cable is firmly connected to the tv and a pc. Check whether a graphic card is correctly inserted into the slot. Check whether the power of a pc and the tv is on. Check whether a graphic card or mode is set appropriately on a pc. Referring to the sta...
SÉura incorporated www.Seura.Com © sÉura ® 2009 all rights reserved sÉura, inc. 1230 ontario road green bay, wi 54311 800.95.Seura t: 920.857.9069 f: 920.857.9490 12/1/09.