SMART-AVI HDR-4x4-Plus User Manual - page 9
9
RS-232 CONTROL WITH Smart Control Pro (Continued)
Main Routing Window
The Main Routing Window enables you to control the router connections by means of the cross-point panel, the button panel,
or with the pre-recorded routes called macros.
Cross-point Panel: Simply click on the cross point itself. The input on the left will then be routed to the output above.
Note: Inputs can be routed to several different outputs, but each output can only have a single input at any one time. So you
can have several connections horizontally but not vertically.
Figure 9-1
The Button Panel: To broadcast all outputs to an input, hold the CTRL key down and click on an input.
Macros: This section of the window is used to save and play black macros. Macros store a set sequence of routes.
Figure 9-2