1 made in u.S.A. Www.Smartavi.Com 1-800-avi-2131 hdr-8x8-xt user manual distribute 8 4k hdmi sources to 8 local hdmi monitors and 8 remote hdmi displays (16 total) via hdbaset with ir, and tcp/ip control support 4k ultra-hd 8x8 hdbaset hdmi matrix with poe.
2 table of contents what's in the box? 2 introduction 3 features 3 applications 3 technical specifications 4 hardware installation 5 front panel functions 6 rear panel 7 remote control 8 control via ethernet 9-10 edid 11 hdbaset receiver 12 ir control system 13 limited warranty statement 14 figure 2...
3 introduction the hdr-8x8-xt with simultaneous cat5e/6/7 and hdmi outputs connects eight hdmi input sources to sixteen displays. This matrix features eight mirrored hdmi outputs, providing 8 hdmi output ports and 8 cat-cable output ports simultaneously. The hdr-8x8-xt supports the transmission of v...
4 technical specifications video hdmi format hdmi 1.4, hdmi2.0, hdcp 2.2 and dvi1.0 compliant video bandwidth 297mhz[10.2gbps] input resolution up to 4k (3840x2160 @ 30hz) output resolution up to 4k (3840x2160 @ 30hz) hdmi connector type a 19 pin female rj-45 connector we/ss 8p8c audio audio connect...
5 hardware installation basic setup: 1. Turn the power off on the hdr-8x8-xt. Do not hotplug! Insert and extract cables carefully with the power switch off. Connecting and disconnecting while the hdr-8x8-xt is powered can result in dam- age to circuitry. 2. Connect up to 8 sources to the hdmi inputs...
6 front panel functions figure 6-1 1. Lcd: displays all information regarding individual input settings/output settings and edid manage- ment. 2. Ir: ir receiver window (accepts only the hdr 8x8 -xt remote control signal). Power: press this button to power the device on/off. The led will illuminate ...
7 rear panel figure 7-1 1. Gnd: connect the housing to ground. 2. Ir matrix ir ext: if the panel sensor is obstructed or the unit is installed in a closed area out of infrared line of sight, an ir rx receiver (eye) can be inserted into the ir ext port at the rear to extend the ir sensor range and en...
8 remote control 1. Power on /standby ： press this button to power on the matrix or put it in standby mode. 2. Input port selection area ： press these buttons to select input 1-8. Press the forward/backward but- tons to cycle from input 1-8. 3. Output port selection area ： press these buttons to sel...
9 control via ethernet hdr-8x8-xt tcp/ip control is a feature that allows source / display switching, edid configuration and network settings to be controlled remotely via http. Manage your hdr-8x8-xt with ease from anywhere in the world. Make sure the hdr-8x8-xt rj45 pc control port is connected to...
10 control via ethernet (continued) the matrix control page is where you switch inputs to outputs. The column running top to bottom on the left shows the 8 outputs. The top row shows the inputs or sources. Clicking the box where the input intersects the output sets the connection. Figure 10-1 shows ...
11 edid edid. What is it and what is it used for? Under normal circumstances, a source device (digital and analog) will require information about a con- nected device/display to assess what resolutions and features it can produce. Using this information from the display, the source can then cater it...
12 hdbaset receiver power over ethernet (poe): this system can run with only the hdr-8x8-xt powered, rxs do not need to be powered. They are pow- ered via the cat 5e/6 cable. Internet access for your connected devices: the rj45 connector on the hdbaset receiver labeled “hdbaset in” is for connecting...
13 ir control system ir in/out: super ir control system interface. ( ir call-back of matrix and source devices ) the matrix is not only a switcher and extender of multiple hdmi signals to multiple remote hdmi receiv- ers. The hdr 8x8 xt also passes ir control signals through the ir call-back system ...
14 limited warranty statement a. Extent of limited warranty smart-avi technologies, inc. Warrants to the end-user customers that the smart-avi product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by t...
15 notice the information contained in this document is subject to change without notice. Smartavi makes no war- ranty of any kind with regard to this material, including but not limited to, implied warranties of merchant- ability and fitness for particular purpose. Smartavi will not be liable for e...
