- DL manuals
- Smart-e
- Transceiver
- SLX-111
- User Manual
Smart-e SLX-111 User Manual
Summary of SLX-111
Page 1
User guide part no: slx111ug smartlynx x+ cat5 av extender model no: slx-111 the clearer picture.
Page 2
Edition 1, april 1, 2006 copyright 2005 smart-e (uk) ltd. Notice the information contained in this document is subject to change without notice. Smart-e makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for par...
Page 3
Table of contents introducing smartlynx ................................................1 what ‘s in the box ....................................................... 1 what is smartlynx ....................................................... 2 why is smartlynx necessary .................................
Page 4
Introducing smartlynx cat5 av extender what‘s in the box? Thank you for buying the smart-e smartlynx cat5 av extender. Depending on the configuration of your system various quantities of the parts below may be included in your shipment. If any of the accessories listed below are missing please conta...
Page 5
What is smartlynx? The smartlynx is a combination of transmitter and receiver devices designed to transmit high resolution computer video and/or audio signal over cat5 wire. Av stands for audio visual and includes such signal for- mats as broadcast video (tv video signal), computer video (vga, svga,...
Page 6
1. Preparing for installation start installation process by ensuring that all video displays and audio devices are compatible with the computers being used. This is accom- plished by connecting the devices directly to the computer and checking that the devices operate as desired without the smartlyn...
Page 7
2. Connect transmitter to the signal source 2.1 connect the video output of the source device to the appropri ate input of the transmitter using the relevant cable. 2.2 connect the audio output of the source device to the audio input of the transmitter using the appropriate cable. 2.3 connect the lo...
Page 8
Installation and operation 4.System power up 3.1 turn the system on by plugging in the power adapter to the smartlynx if they are not yet connected (see diagram oppo site). 3.2 power up your computer. 3.3 observe both transmitter and receiver power led are on, and source device is switched on. 5. Pr...
Page 9
Installation and operation of receiver page 6 1. Connecting slx-rx111 to the display device 1.1 making sure that the cat 5 cable is connected to the slx-tx111 transmitter output, connect the cable to the rj45 socket on the receiver unit. 1.2 if the cable connection is correct the power led on the fr...
Page 10
Installation and operation of receiver page 7 2. Connecting slx-rx111 to audio and infra-red control 2.1 connect the speakers or audio input on the display to the audio output on the receiver, using a 3.5mm jack plug. 2.2 if using the receiver to transmit infra-red signals back down the cable to the...
Page 11
Installation and operation of receiver page 8 3. Mounting the receiver the receiver unit can compensate for cable losses over a length of 20-100m, and for mounting purposes the unit is provided with two ’mounting-hole’ points for fixing to the wall or screen (see diagram below). Simply hold receiver...
Page 12: Slx-111
Page 9 technical information slx-111 video input signal type—connector uxga-hd15 / rgbs-scart / yuv-3xrca / yc-4pin minidin / cvbs-scart bandwidth 300mhz impedance 75 ohm audio input signal type stereo audio bandwidth 20khz, 0db impedance 10k ohm connector 3.5mm mini-jack, female local audio output ...
Page 13
Trouble shooting page 10 no video? 1) are the green leds on both the transmitter and receiver units? If not check that the 24v power supply (psu) is connected and the led on the psu is lit. Check the cable compensation dials on the underside of the unit. Over compensation of the red and blue channel...
Page 14
Limited warranty statement a. Extent of limited warranty 1. Smart-e (uk) ltd warrants to the end-user customers that smart-e product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by the customer. Custo...
Page 16
Product range product code description smartlynx-v sli-100 transmitter and receiver pair smartlynx-x slx-400 transmitter and receiver pair slx-100 transmitter and receiver pair smartlynx-x+ slx-200 transmitter and receiver pair with rs232/ir smartcast-v scv-tx500 one to five transmitter unit smartca...