Smart+ Products SPP-1500-4PR User manual - page 7
OPERATING INSTRUCTIONS
1
、
Start and select working mode
2
、
Setting room temperature
Voltage Rating
120 V (60Hz)
Power Consumption
1000/1500W
Unit Size
13.1 in. (W) x 16.5 in. (D) x 16.7 in. (H)
Unit Weight
22.7 lbs
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Or
Select a heat setting. Press the MODE button to toggle
between the three heat settings.
Power for heat-up mode is 1500W; and heat-down is
1000W. ECO mode is an Economic Energy Saving
Function. When ECO mode is chosen the heater will
consume one-third less power once the room temperature
reaches a certain point.
Voltage Rating
120 V (60Hz)
Power Consumption
1000/1500W
Unit Size
13.1 in. (W) x 16.5 in. (D) x 16.7 in. (H)
Unit Weight
22.7 lbs
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Or
Select a heat setting. Press the MODE button to toggle
between the three heat settings.
Power for heat-up mode is 1500W; and heat-down is
1000W. ECO mode is an Economic Energy Saving
Function. When ECO mode is chosen the heater will
consume one-third less power once the room temperature
reaches a certain point.
Or
Or
Or
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
Or
Set temperature indication varies from 86
℉
to 59
℉,
or
from 30
℃
to 15
℃
. Once you have chosen the desired
temperature, the heater will remain on until the room
temperature increases to the temperature on the digital
display. The heater will cycle on and off to maintain the
desired room temperature.
Press
℃
/
℉
button, then digital display will indicate
Fahrenheit value or Celsius value.