Svc100 / svc100gps! Vehicle journey recorder! Thank you for purchasing this journey recorder. Please ensure that you read and understand this user guide and use it before connecting and installing this recorder. Please store the user guide in an easily accessible location. Ver 2.0.0 2 nd edition use...
Caution damages due to production malfunction, loss of data, or other damages occurring while using this product shall not be the responsibility of the manufacturer. Although the product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the c...
Gps reception 1. Activate the product in an area without large buildings to improve gps reception. 2. The temperature range for optimum operation of the gps receiver in your car is -10 ~ 50°c. 1. When using the product for the first time or after a long period (more than three days), it may take a l...
Contents smart witness svc100 / svc100gps camera/recording unit including bracket 2gb sd memory card (the analysis software is on the provided sd card) power cable (cigarette jack) wire splice clips (x5) 5 sticker for windscreen mounting (double sided tape x1) usb 2.0 sd card reader spare camera mou...
Introduction camera lens bracket adhere tape on bracket front left side right side sd memory card slot 6 dc power in (dc 12~24v).
Intoduction back 7 note: formatting [initializing] sd memory card can be done using sd card format button. However we recommend that you format [initialize] the sd card using the pc viewer software on the pc. Record led blue led overwrite led red led record button internal gps antenna sd card format...
Installation 1. Insert the sd memory card into the sd card slot. Please make sure to disconnect the power cable when inserting or ejecting the sd memory card. 8 park your vehicle on a flat level surface. Turn off the engine before installing the svc100 / svc100gps. 2. Attach the svc100/svc100gps usi...
Installation 3. Adjust camera view. Make sure the lens has an unobstructed view. Check from outside the vehicle to check the camera angle. 4. Svc100/svc100gps unit requires a continuous 12-24v dc power source from the vehicle. Plug in the power. The provided power cord cable route should be from the...
Function automatic start connect your vehicle’s power cable to the svc100 / svc100gps after starting the vehicle. Then svc100 / svc100gps will be automatically started. (use the provided power cable.) event record (when record method set as “event record”) the event recording will be automatically s...
Operation 1. Connect your vehicle’s power cable to the svc100/svc100gps after starting the vehicle. 2. Blue led & red led will be slowly blinking simultaneously and then the blue led will remain on. The blue led light means svc100/svc100gps is ready for the event recording. 3. The event recording wi...
Software user guide svc100/svc100gps pc viewer guide 12 pc system requirement if the pc does not meet the minimum system requirement, the analysis software may not function properly. Os windows 2000, windows xp windows vista cpu pentium4 2.6ghz or higher ram 512mb or higher interface sd memory card ...
Software installation 1. Connect the sd card into your pc (if your computer does not have and sd card slot use the usb sd card reader) and open the “my computer” 2. Right-click the “driverec1” drive and select [open] 3. Double click [setup.Exe] at [pcsw] folder. 4. Select the language and then follo...
Connect sd memory card 1. Connect sd memory card into the sd card reader. 2. Run “smartwitness” 3. Select [file] and then click “select data folder” or click [open] button 14 [open] button 4. Select sd memory card folder at the folder select window..
The ‘date’ formats and ‘speed’ unit will be set automatically according to the pc windows setting. However it can be changed with this pc viewer setting menu. Up/down flip left/right flip normal video pc viewer setting this setting is for the pc viewer itself. To set the recorder, refer to page 27. ...
5. Check the event or normal recorded file from the list using mouse or click [all] button. Then click [load] button. Load button check the event “g-senor” means recording was activated by impact “switch” means recording was activated by button when record method set as “event record” select file fo...
File loading 6. Click the [load] button once, the [filelist] tab will be changed to the [playlist] tab as shown below 16 when record method set as “event record” return to the [filelist] check it for the continuous playback now playback this file when record method set as “normal record” return to t...
Playback screen 17 [post]: post-recorded frame [pre]: pre-recorded frame display frame/total frames number frame size check it for continuous playback when record method set as “event record” when record method set as “normal record” event area marking by g-sensor or button (5seconds per each event)...
7. Click play button for playback. Event before 15seconds after 5sec drag & move the white bar to move the playback position. Playback buttons pause next image previous image x0.5, 1 play x2, 4, 8, 16 fast forward x0.5, 1 reverse x2, 4, 8, 16 fast reverse single view 4x4 multi view (thumb-nail funct...
Note: pc keyboard hot buttons function pc keyboard hot buttons 1024x768 mode enter return to the previous mode: enter full screen mode alt + enter return to the previous mode: enter playback speed control ctrl + f 0.5 => 1 reverse playback speed control ctrl + b 0.5 => 1 pause / play space previous ...
The route taken will be displayed on the google map at lower right corner of the software. Google map (supported by the svc100gps model only) 20 zoom out to see the route & position on google maps, the gps data should be recorded with video. To see google maps, the pc should be connected to the inte...
7. Click the button for 4x4 multi view (thumbnail function) click the thumbnail image to change the playback position. Click right the mouse button to single image playback mode. 8. Click [close] button to quit the playback. Click [close] to finish the playback. Then the [playlist] window will be ch...
Save jpg file & avi file 9. Pause the playback and click ‘save image’ icon to make a jpg file. 10. Click ‘save avi’ icon to make a avi file. ‘save image’ icon ‘save avi’ icon 22.
Print image print image icon 11. Pause the playback and click ‘print image’ icon. Type in the file name [print title] & any comments [print comment] using the keyboard. The ‘print comment’ window allows up to 7 lines total. 23.
Make report 12. Click [print] button in the print preview windows for printing. The file name [print title], comment [print comment], g-sensor graph & map (for svc100gps model only) will be printed on the first page. Click [ 2x2 ] and then click [print] to print 4 images in one page. 24.
Backup event/log files 13. Click [backup event/log files] icon to backup the files to the pc. [backup event/log files] icon select [event data] or [normal data] and select [log data] first, before clicking the [backup event/log files] icon. Then selected event or normal or log data list are on the b...
Setting the vehicle journey recorder 14. Click [recorder setting] icon for setup. [recorder setting] icon recording method event record (automatically starts recording by g-sensor event or record button) normal record (automatically starts continuous recording just after power on) image resolution 6...
Beep on record “beep” sound on/off when event recording start g-sensor setting check simple setting mode and then change the sensitivity. High sensitivity like 8 or 9 means recording will be started at very low impact. Date/time automatically synchronize with gps time. However manual time setting is...
28 g-sensor setting if g-sensor sensitivity value is too high like 8 or 9, it becomes too sensitive, so it will detect even a light impact or light turn. If g-sensor sensitivity value is too dull, so it might not detect a notable incident. So, sensitivity should be set in consideration of the vehicl...
15. Click [about] icon to check the product information. About icon 29 product information.
Log file playback 16. Select [log] windows and then check the log from the log list using mouse or click [check all] button. Then click [load] button. Gps speed, g sensor x value, g sensor y value, g sensor z value, can be checked first on the small check box at right side of each value. Then input ...
31 gps log to kml converter (for google earth) to see the whole route on google earth, select the log file and click google earth button. (svc100gps only) step1. Install the google earth on your pc. ( http://earth.Google.Com/ ) step2. Check the log file step3. Click google earth button the route wil...
Specification image sensor 1/4" cmos dsp standard dsp angle of view 170° video resolution 640x480, 320x240 recording speed up to 25 fps recording modes continuous by impact by emergency button. Recording time 2gb (37minutes~ 36hours) 16gb (7hours~167hours) backup sd memory card memory 2gb sd memory ...
Recording time table 33 resolution quality size fps 2gb 4gb 8gb 16gb 640x480 high 40kb 1 555 min 1408 min 3115 min 109 hours 5 111 min 282 min 623 min 22 hours 10 55 min 141 min 311 min 11 hours 15 37 min 94 min 208 min 7 hours low 20kb 1 1109 min 2816 min 6229 min 167 hours 5 222 min 563 min 1246 m...
Technical support & warranty 34 technical support for technical support, please contact your local distributor. Limited warranty this product is supplied with 1 year warranty. The warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and te...
Optional accessory (permanent power cable) 35 ① recorder ② fuse box (+) ③ ground fuse: 250v 1a model name: svc100ppc the permanent power supply cable will allow you to hard wire the svc100/ svc100gps unit to the fuse box of your vehicle. The ground cable should be contacted at the car body. Connect ...
Appendix (upgrade) make a [program] folder on the sd root folder as shown below, copy “svc100_x.X.X.Bin” file to the sd card [program] folder. 1. Prepare firmware 2. Upgrade svc100/svc100gps insert the prepared sd card to svc100/svc100gps unit and turn on the power. The blue & red led will quickly b...
Turn on the svc100/svc100gps and press the [record] button to check the unit is recording properly. If the svc100/svc100gps records as normal, turn off the power. Insert the sd card into your pc and initialise it using the software once you have successfully tested the svc100/svc100gps. To initialis...
4/7 click “ok” and check [quick format] and un-check [backup configuration file] as below, 4. Uninstall the old version of pc viewer from your pc pc windows [start] > [control panel] and uninstall [smartwitness] 5. Install the new pc viewer run setup.Exe and install the new smartwitness x.X.X.X note...
Manufactured exclusively for:! Www.Smartwitness.Com! Smart witness is a division of xvision!.