Smartahome Grand Ultimate 2000 User Manual - page 14
15
The "Fn" + "Fx" toggles between three settings. By default, the LCS
panel is on. The first toggle attempts to power both
the LCD panel and the external signal. Sometimes, laptops do not
have enough power to show both the LCD and the
Grand UltraView, so only a scrambled signal is viewable on the TV.
The third toggle turn off the LCD panel and shows
only the external display (the TV, in this case).
Q: I have an older model of a television. Would I be able to use my
video converter with a television as old as this one?
A: Yes, you may need a special adapter called an RF modulator. This
device converts the composite video signal from your video
converter to an Antenna signal, which can be viewed on your TV
using Channel 3 or 4 or 13. You may also use a VCR in some cases.
Refer to section D3 for more information.
Q: Can I use multiple televisions to view the same image from my
computer?
A: Yes, Grand Ultimate 2000 provides 1 CVBS OUT, 1 S-VHS OUT
and 1 RGB OUT. You may connect one television to the next using a
composite video cable or an S-Video between the “VIDEO IN” and
“VIDEO OUT” ports. We recommend using no more than five or six
televisions.
SMARTHOME™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order 7743