1 made in u.S.A. Www.Smartavi.Com 1-800-avi-2131 fxcore mx88 user manual 8x8 kvm fiber optic matrix switch delivers kvm operations, uncompressed hd signal routing long-distance kvm fiber optic matrix switch.
2 table of contents what's in the box? 2 introduction 3 features 3 applications 3 technical specifications 4 hardware installation 5 navigating the on screen display (osd) 6 edid learning 6 rs-232 control 7 rs-232 integration with third party software 8-9 limited warranty statement 10 part no. Qty. ...
3 introduction the fxcore-mx88 from smartavi is a reliable, secure, long-distance signal router that op- erates on fiber optic cables, allowing for safe and efficient dvi av (audio and video) opera- tion. In critical environments where security and speed are essential, the fxcore mx88 enables users ...
4 what is the difference between multi-mode and single mode fiber? Multi-mode: uses larger diameters allowing for high bandwidth over medium distances. Because of the multiple light paths or signals there is a higher chance of distortion or overlap of light signals over longer distances. Device-to-m...
5 optical input connector full duplex multimode lc (connecting to tx and rx units requires lc to lc con- nectors.) type 8 multimode full duplex lc fiber optic inputs and outputs wavelength 850nm, vcsel class 1 ael laser operating distance multi-mode 730 ft. @ multimode 62.5/125 μ m mmf—om3 cable 140...
6 1. Turn off all input and output devices and displays. 2. Connect dvi-d and usb-a to b cables from up to 8 input devices to the fdx-3000-mx transmitters. 3. Optionally connect audio cables from up to 8 input devices to the fdx-3000-mx transmitters. 4. Optionally connect rs-232 cables from up to 8 ...
7 navigating the on screen display (osd) to access the osd menu, use the keyboard attached to the fdx-3000-mx receiver and press the hot keys ctrl+ctrl+'o'. The osd menu will display all of the inputs in a list. Commands can be performed in the osd menu through the use of the keys outlined on the bo...
8 rs-232 control you can control the fxcore from a pc via rs-232 using a terminal client software such as putty. Check the rs-232 connectors on your pc serial port or your usb to rs-232 adaptor and the fxcore to determine the cable needed. Use a terminal client software such as putty to connect to t...
9 rs-232 integration with third party software command mode. These commands should be supported in both command mode (cm) and debug mode. Nn = frame address #00 to #ff (default = 00) cc = input, computer #01 to n (max 08) uu = output, user #01 to n (max 08) = carriage return (enter) * to enter debug...
10 function description protocol password sets the passwords for users and admin \\fnnwuu name sets the name for computers and admin \\fnnnuu permissions review and set permissions \\fnnp{ccuup} restore factory settings restore factory settings. Do not restore default admin’s name/password. \\fnnf h...
11 limited warranty statement a. Extent of limited warranty smart ‐ avi technologies, inc. Warrants to the end ‐ user customers that the smart ‐ avi product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchas...
12 notice the information contained in this document is subject to change without notice. Smartavi makes no war ‐ ranty of any kind with regard to this material, including but not limited to, implied warranties of merchant ‐ ability and fitness for particular purpose. Smartavi will not be liable for...
