SmartAVI FXCORE MX88 User Manual - page 9
9
RS-232 INTEGRATION WITH THIRD PARTY SOFTWARE
Command Mode.
These commands should be supported in both Command Mode (CM) and Debug Mode.
nn = frame address #00 to #FF (default = 00)
cc = Input, computer #01 to n (max 08)
uu = Output, user #01 to n (max 08)
*
To enter Debug Mode:
Passwords are case sensitive.
Default Username: Admin
Default Password: Pass
Function
Description
Protocol
Control Port
View and control an input from an output assigned to it
\\FnnCccuu
Disable Control Port Disable the control port cross-point
\\FnnCccuuD
Broadcast Port
Broadcast video and audio to all outputs with C or V per-
mission,
\\FnnBcc{uu}
Disable Broadcast
Port
Disable the broadcast port cross-point
\\FnnBD
View Port
View an input from an output assigned to it (cross-point).
Video and audio only.
\\FnnVccuu
Disable View Port
Disable the view port cross-point
\\FnnVccuuD
Output Enable
Enable an output.
\\FnnOuu
Output Disable
Disable an output
\\FnnOuuD
Query
Displays the current cross-points of the matrix.
\\FnnQ
Reboot Matrix
Reboots the matrix. All settings should remain the same.
\\FnnR
New Frame Ad-
dress
Set new frame address to the unit
\\FnnAnn
Debug Mode
Enter Debug mode for advanced features. *
\\FnnD
Help
Display help screen
\\Fnn?
\\FnnHELP