- DL manuals
- Smarteh
- Touch Panel
- LTS-1.PC2
- User Manual
Smarteh LTS-1.PC2 User Manual
Summary of LTS-1.PC2
Page 1
User manual longo touch screen lts-1.Pc2 7” touch screen version 1 smarteh d.O.O. / poljubinj 114 / 5220 tolmin / slovenia / tel.: +386(0)5 388 44 00 / e-mail: info@smarteh.Si / www.Smarteh.Si.
Page 2
Longo touch screen lts-1.Pc2 written by smarteh d.O.O. Copyright © 2015, smarteh d.O.O. User manual document version: 001 november, 2015 i.
Page 3
Longo touch screen lts-1.Pc2 standards and provisions: standards, recommendations, regulations and provisions of the country in which the devices will operate, must be considered while planning and setting up electrical devices. Work on 230 v ac network is allowed for authorized personnel only. Dang...
Page 4
Longo touch screen lts-1.Pc2 longo touch screen lts-1.Pc2 1 abbreviations................................................................................1 2 description...................................................................................2 3 features........................................
Page 5: 1 Abbreviations
Longo touch screen lts-1.Pc2 1 abbreviations sorted by order of appearance in document: sw software win ce windows embedded compact lcd liquid crystal display sd secure digital led light-emitting diode ts touch screen p/e program-erase vnc virtual network computing scada supervisory control and data...
Page 6: 2 Description
Longo touch screen lts-1.Pc2 2 description lts-1.Pc2 touch screen is 7” windows ce device for supervising and managing of control systems. It can be used with user made proprietary sw or with available scada packages, supporting win ce. We offer movicon developing environment and movicon ce light li...
Page 7: 3 Features
Longo touch screen lts-1.Pc2 3 features figure 1: lts-1.Pc2 touch screen table 1: features type: 7” tft lcd, 16:9, resistive touch screen operating system: windows ce.Net 5.0 processor: samsung s3c2440a @ 400 mhz memory: 64 mb sdram on board, (30 mb usable in win ce) storage: 256 mb nand flash on bo...
Page 8: 4 Operation
Longo touch screen lts-1.Pc2 4 operation touch screen is preset for automatic start of progea movicon ce (2h demo, if license is not activated) and movicon run-time is preset for automatic start of smarteh sample application. Basic setting like screen saver and touch calibration can be entered throu...
Page 9
Longo touch screen lts-1.Pc2 4.3 automatic start of movicon after power-up or reboot automatic start of movicon after power-up or reboot is set in the win ce registry. It can be removed or changed using registry editor on the win ce touch screen. To access this setting, use start → run from the task...
Page 10
Longo touch screen lts-1.Pc2 4.6 select and start the scada application on win ce touch screen loaded application always starts, as there is no editor on the ce device. Changes can be made using (developer) pc with installed movicon and then copied to the sd card. When starting movicon the pop-up fo...
Page 11: 5 Installation
Longo touch screen lts-1.Pc2 5 installation 5.1 connection figure 1: layout of the connectors 7.
Page 12
Longo touch screen lts-1.Pc2 5.2 mounting dimensions drill four holes Φ3 mm (being 180 x 135.5 apart) for fixing the touch screen, and cut rectangular opening 181 mm x 131 mm to fit in. Figure 2: mounting dimensions dimensions in milimeters. 8.
Page 13
Longo touch screen lts-1.Pc2 figure 3: mounting, wall mount version 9.
Page 14
Longo touch screen lts-1.Pc2 5.3 module labeling figure 4: labels example label 1: label 2: label 3: label 1 description: • lts-2.Pc2 is the full product name • p/n: 206lts10win002is the part number • 206 – general code for longo touch screen product family • pc2 – panel short product name • 10 – ye...
Page 15: 6 Technical Specifications
Longo touch screen lts-1.Pc2 6 technical specifications table 2: technical data power supply voltage 5.2 v dc (optional lps-2 power supply available) power consumption current 1.2 a material front plate aluminium, painted in gray (ral 9006) or mate black (ral 9004) back plexiglass cover dimensions l...
Page 16
Longo touch screen lts-1.Pc2 table 3: environmental specifications power supply 5.2 v dc, 1.2 a external power supply power consumption 6 w maximum dimensions (w x h x d) 210 x 160 x 45 mm weight 850 g maximum altitude 2000 m mounting position horizontal ambient temperature 0 to 50 °c ambient humidi...
Page 17: 7 Changes
Longo touch screen lts-1.Pc2 7 changes the following table describes all the changes to the document. Date v. Description 13.
Page 18: 8 Notes
Longo touch screen lts-1.Pc2 8 notes 14.