Smarteh LTS-1.PC2 User Manual - page 9
Longo Touch Screen LTS-1.PC2
4.3 Automatic start of Movicon after power-up or reboot
Automatic start of Movicon after power-up or reboot is set in the Win CE registry. It can be removed
or changed using registry editor on the Win CE Touch Screen. To access this setting, use Start
→ Run
from the taskbar, type regedit and click OK.
Path to the setting is:
My Device
HKEY_LOCAL_MACHINE
init
Launch90
\Storage Card\MovXCE\MovCE.exe
Depend90
12, 32, 3C
The settings Launch90 and Depend90 can be changed or deleted, if auto-start is not required.
4.4 Manual start of Movicon
If automatic start of Movicon is disabled, Movicon can be started manually, using
•
Start
→ Run from the taskbar.
•
Select Browse and then point to
•
\Storage Card\MovXCE\MovCE.exe.
•
Click OK to start Movicon.
Movicon will then try to run the project specified in the MovCE.boot "Boot File".
4.5 Selecting application program to be loaded at Movicon startup
When Movicon is started, it will search for the MovCE.boot file in the root of the Storage Card at its
startup. The file specifying the path and name of the project file to be run should be in this file. The
file is in XML format and is structured as follows:
The MovCE.boot file is automatically created in the root of the compact flash after the project has
been uploaded. This happens in automatic only when using the "MS Active Sync" option and by using
a different plug-in programmed to manage this function.
If needed to create/change this file manually, just change the path and file-name (3
rd
row).
Every time on start or restart, Movicon will run the project specified in the MovCE.boot "Boot File"
in the Storage Card's root.
5