Smartek ST-X500 Instruction Manual - page 15

Page14

Steam press Instruction Manual

PANTS:

a. Place the pressing Cushion under the waistband and press.

b. Reposition the waistband and continue around the pants until the entire waistband is pressed.

c. To press the inseam, place the Pressing Cushion under the area to be pressed. Press the entire inseam and repeat for the other leg.

d. Press the front and back pleats using the same method. Fold one leg along the creased line.  Place it on the Ironing Board so that the seams will 

not be pressed. Press the crease.

PLEATED SKIRTS:

a. Place the Pressing Cushion under the waistband and press.

b. Reposition the waistband and continue around the skirt until the entire waistband is pressed.

c. Place the pleated area on the Ironing Board.  Fold the pleats carefully and press.

d. Continue with each pleated area until the garment is completed.

OTHER ITEMS:

a. EMBROIDERY should be placed FACE DOWN on the Ironing Board to reduce wear and prevent damage to delicate work.

b. CURTAINS may be pressed running them from one end of the Ironing Board to the other and pressing in sections until complete.

c. DRESSES with special needs should refer to the above sections on pleats, shirts (bodices), etc., for proper use of the Pressing Cushion.

IMPORTANT NOTE: Many types of clothing are intricate and unique to their owner.  You may have to experiment with the best way to press 

challenging garments. remember, if you put in a crease you did not intend, you can remove it just as simply with one of the 

methods contained in these instructions.