1 electric underfloor heating installation manual mat 100 w /150 w /200 w before you begin installing, read through these instructions carefully and check that you have all the components required. Www.Smartmat.Co.Uk 01473 559077 lifetime warranty.
2 introduction important notes, please read carefully before proceeding with installation the smartmat brand thank you for choosing the smartmat underfloor heating mat from our range of electric underfloor heating solutions. The smartmat range has been manufactured to surpass all current industry st...
3 electrical requirements 100 watt/150 watt/200 watt please follow these instructions carefully. If you require assistance prior to or during your installation please call our helpline on 01473 559077 electrical requirements before installing the smartmat you should make allowance for the electrical...
4 installation instructions 100 watt/150 watt/200 watt step 1 draw a layout of your room including all obstacles e.G. Toilet, sink etc, (use the floor plan grid on page 10) then determine the required floor area to be heated. Decide a suitable position for the thermostat (start point) then sketch th...
5 installation instructions 100 watt/150 watt/200 watt steps 5, 6 & 7 when you have reached the end of the mat run, carefully cut the grey backing mat in between the two orange cables (do not cut the orange cable) and turn the mat to its new position. Ensure the cable remains a minimum of 50mm apart...
6 mat planning examples 100 watt/150 watt/200 watt please follow these instructions carefully. If you require assistance prior to or during your installation please call our helpline on 01473 559077. Layout of second mat layout of first mat plan using two mats plan using one mat planning your mat wh...
7 testing & commissioning 100 watt/150 watt/200 watt warranty validation to validate your lifetime online warranty registration you must perform the insulation resistance test, the heating cable resistance test and the sensor resistance test three times during the installation process. 1. Before you...
8 product specifications 100 watt/150 watt/200 watt 100w quick find part code coverage length width wattage resistance +9/-4% 8488 smartmat 100-1 1.00m² 2.0m 0.5m 100w 529.00 Ω 8489 smartmat 100-1.5 1.50m² 3.0m 0.5m 150w 352.67 Ω 8490 smartmat 100-2 2.00m² 4.0m 0.5m 200w 264.50 Ω 8491 smartmat 100-2...
9 200w quick find part code coverage length width wattage resistance +9/-4% 8516 smartmat 200-1 1.00m² 2.0m 0.5m 200w 264.50 Ω 8517 smartmat 200-1.5 1.50m² 3.0m 0.5m 300w 176.33 Ω 8518 smartmat 200-2 2.00m² 4.0m 0.5m 400w 132.25 Ω 8519 smartmat 200-2.5 2.50m² 5.0m 0.5m 500w 105.80 Ω 8520 smartmat 20...
10 floor plan sketch calculate your total heat area.
11 floor plan sketch calculate your total heat area scale approx 1:18 (56mm = 1m) when sketching your floor plan, please work around any permanent / fixed furniture items as these will block the heated areas.
12 troubleshooting 100 watt/150 watt/200 watt symptom probable causes corrective action floor does not heat no power at controller check power supply rcd/mcb tripped check the circuit is not overloaded thermostat not set correctly refer to thermostat instructions cable not correctly connected with t...
