Smartparts SP104MW User Manual - page 10
www.smartpartsproducts.com
10
E-Book
This function is used to display text files. Use the arrow buttons on
the remote control to scroll up and down.
Edit
This is the function used to perform several management functions
as noted below. These functions include Copy/ Delete, Color Setup
and USB Port Configuration. The Copy/Delete function is used to
copy files from one medium to another, or to delete files. In this
manner files that are on the external or internal memory can be
copied to other memory (external or internal). Files can also be
deleted in the same manner. Select Copy/ Delete from the Edit
Menu. The next screen is to select the media where the “From”
files are located. Use the Up and Down arrow buttons to locate the
desired files. Press the Enter button to tag the files. A check mark
will be noted next to each of the tagged files. Use the navigation
buttons to tag each desired file. When done, press the OSD button.
A secondary screen will appear to select the desired control
function (copy, delete, etc.) Use the Up and Down navigation
buttons to select the desired function. Now use the Left arrow
button to get back to the media screen. Select the “To” media
Setup button to present the control screen. If this is a Copy and
Paste function, press Paste function and tagged files from one
memory type will be copied into the other memory type. While
copying, the screen will display a busy message followed by a
complete message when the copy / paste function is complete.