Smartwatch H20SWDVR16 Quick Manual - page 8
SmartWatch DVR Operation Manual
7
13
eSATA
Connects external SATA HDD, DVD-R/W.
14
GND
Ground (needs to be connected when DVR starts up)
15
110~240VAC
Power supply.
16
POWER
Switch for turning on/off the device.
The rear panel of the H20SWDVR32R is shown in Figure 2.5
Figure 2.5 Rear Panel of H20SWDVR32R
Table 2.3 Description of H20SWDVR32R Rear Panel
No.
Item
Description
1
VIDEO OUT
BNC connectors for video output.
2
AUDIO OUT
RCA connector for audio output.
3
LINE IN
RCA connector for audio input.
4
AUDIO IN
RCA connector for audio input.
5
VIDEO IN
BNC connector for analog video input.
6
VGA
DB15 connector for VGA output. Display local video output and menu.
7
HDMI
HDMI video output.
8
USB Interface
Connects USB mouse or USB flash memory devices.
9
LAN Interface
RJ45 10M / 100M / 1000M Ethernet interface.
10
RS-232
Connector for RS-232 devices.
11
RS-485 Interface
Connector for RS-485 devices. Connect the D+ and D- terminals to R+ and
R- terminals of PTZ receiver respectively.
12
Alarm In/Out
Connector for alarm input/output.
13
eSATA
Connects external SATA HDD, DVD-R/W.
14
GND
Ground (needs to be connected when DVR starts up)
15
110~240VAC
Power supply.
16
POWER
Switch for turning on/off the device.