Sputec MVS User manual - Loop Record
On the back of the MVS device, you will see a slot above the Headphone and
Line In ports. Place the Micro SD memory card (up to 32GB), text facing
upwards, into the slot and push in until it clicks into place. To remove or
replace the Micro SD memory card, simply push in until it clicks in/out of
place.
Spy Tec
www.spytecinc.com
Spy Tec
www.spytecinc.com
15
Navigate to the Camera IR LED selection by using the VOL buttons and press
the OK button. Set to On, Auto or Off and press the OK button again. Press the
ESC button to return to the previous menu.
Loop record
When the Micro SD card is full, the oldest one or several files are automatically
deleted to release the space for continue video recording.
Access the Monitor Settings menu of the hidden interface. To access this
menu, press VOL keys together for 3 seconds and navigate to the DV Settings
icon. Press the OK button.
For Video loop mode, use the VOL keys to navigate to the DV icon (first on left)
and press the OK button. Press the OK button again to access the DV
selections. Navigate to the various selections by using the VOL buttons and
press the OK button. Set to On or Off in the Video Loop Record option and
press the OK button again. Press the ESC button to return to the previous
menu.
For Audio loop mode, use the VOL keys to navigate to the Audio icon (last to
right) and press the OK button. Press the OK button again to access the Audio
selections. Navigate to the various selections by using the VOL buttons and
press the OK button. Set to On or Off in the Audio Loop Record option and
press the OK button again. Press the ESC button to return to the previous
menu.
Continuous Power Supply Option
Plugged in, this machine may continuously record video without the limitation
of battery capacity.
Motion Detection Recording
Access the Monitor Settings menu of the hidden interface. To access this
menu, press VOL keys together for 3 seconds and navigate to the DV Settings
icon. Press the OK button. Use the VOL keys to navigate to the DV Mode
option and press the OK button. Set to Motion Detection Mode and press the
OK button. Press the ESC button to return to the previous menu.