- DL manuals
- SPY
- Security Sensors
- 670
- Operating Instructions Manual
SPY 670 Operating Instructions Manual
Summary of 670
Page 1
S py ® model 6 70 portable wet sponge h o l i day detector o p e r at i n g i n st r u c t i o n s pipeline inspection company p i c lt d .Co m.
Page 2
2 p i c lt d .Co m p i c lt d .Co m 3 welcome thank you for purchasing the spy ® model 670 wet sponge holiday detector. Pipeline inspection company and our spy ® brand of coating inspection, jeep meter and pig tracking equipment has been serving companies all over the world for over 60 years. With t...
Page 3
4 p i c lt d .Co m p i c lt d .Co m 5 u n it cali bration principles of wet sponge h o l i day d e t e ct i o n as the operator of this unit you require accurate, safe, and reliable equipment to perform coating inspections at the proper output voltage. Prior to leaving our manufacturing facility pip...
Page 4
6 p i c lt d .Co m p i c lt d .Co m 7 670 overview the new spy model 670 wet sponge holiday detector operates on a single 9 volt alkaline battery. Unit output voltage is 67.5 volts dc. This voltage makes the detector highly sensitive and accurate. Compact and light weight with no bulky battery packs...
Page 5
8 p i c lt d .Co m p i c lt d .Co m 9 connecting accessories step 3. Connecting the ground cable. The ground cable attach point is on the backside of the 670, untwist the black knob to expose the hole in the ground connector, thread the ground wire through the hole and then tighten the black ground ...
Page 6
10 p i c lt d .Co m p i c lt d .Co m 11 battery instructions connecting optional accessories for a range of optional accessories and spare parts that enhance and expand the capabilities of the spy 670 spy offers an optional 670 inspection kit. See the accessories page in this manual or call your spy...
Page 7
12 p i c lt d .Co m p i c lt d .Co m 13 controls testi ng i nstructions no signal adjustment is necessary with the 670 wet sponge holiday detector. The unit can easily be tested by means of the test buttons located on the front operating panel. The test is performed by turning the 670 on and by pres...
Page 8
14 p i c lt d .Co m p i c lt d .Co m 15 step 6: place the electrode sponge on the coated surface and begin passing the sponge across the surface (see diagram 2 below). Several passes should be made over the test area to ensure that moisture has penetrated any possible holiday. If the sponge passes a...
Page 9
16 p i c lt d .Co m p i c lt d .Co m 17 troubleshooting guide troubleshooting guide problem possible solution correction method holiday detector will not detect holidays check detector ground connection with the detector off remove the ground cable, clean banana plug connection point and reconnect g...
Page 10
18 p i c lt d .Co m p i c lt d .Co m 19 tech n ical speci fications if maintained the model 670 wet sponge holiday detector will offer you years of dependable operation. Regular care and maintenance of the unit is a requirement of good quality preventative maintenance practices. Warning! This detect...
Page 11
20 p i c lt d .Co m p i c lt d .Co m 21 pipeline inspection company, hereafter referred to as (spy ® ) warrants that spy ® ‚ model 670 series holiday detectors shall, under normal use and service, be free from defects in material and workmanship. Spy ® ‘s entire warranty obligation shall be limited ...
Page 12
22 p i c lt d .Co m p i c lt d .Co m 23 accessories the model 670 has a wide variety of accessories to assist you with your coating inspection project. Please call our office at (713) 681-5837 or email us at sales@picltd.Com for more product details or to place an order. Related equipment ground cab...
Page 13
24 p i c lt d .Co m p i c lt d .Co m 25 model 670 holiday power on off continuous light • horn wet sponge holiday detector pipeline inspection co www.Picltd.Com ohm test 80k 100k wet sponge inspection kit optional 670 inspection kit for added operator comfort & i nspection capabi lity kit includes: ...
Page 14
26 p i c lt d .Co m p i c lt d .Co m 27 user notes user notes.
Page 15
Pipeline inspection company p i c lt d .Co m.