SPY 670 Operating Instructions Manual - page 4
6
p i c lt d .co m
p i c lt d .co m
7
670 overview
The NEW SPY Model 670 Wet Sponge Holiday Detector operates on a
single 9 volt alkaline battery. Unit output voltage is 67.5 volts DC. This
voltage makes the detector highly sensitive and accurate. Compact and
light weight with no bulky battery packs allowing for non destructive
inspection of paints, epoxy paints and coatings 1-20 Mils.
Inspect larger surfaces faster and with less operator fatigue using a
quick attach, easy to use roller sponge electrode. (Optional Accessory).
•
New Ergonomic, Balanced, Lightweight Hand held Design
•
New Rugged, Durable Construction
•
67.5 Volt DC, Sensitive and Accurate
•
New Quick Change Battery Compartment
•
A New Wide Range of Quick Change Accessories
•
New Inspections Kit w/Carrying Case (Optional)
1 Standard Large Sponge
2 Standard 14.5” Wand Shaft
3 Quick Connect Points for
Optional Accessories
4 Built-In 80Kohm and 100Kohm
Calibration Test Buttons
5 Water Proof Power Switch
6 Audible Holiday Indicator
7 Visual Holiday and Low Battery
Indicator
8 Shoulder Strap Connection
9 Quick Change Battery
Compartment
10 Ground Cable Connection
9
10
3
3
5
6
7
8
4
2
1