Spytec G1W-H User Manual - Specifications
If the microSD card is unrecognized, a blue screen will appear with the
message “PLEASE INSERT SD CARD.” Plug the microSD into an adapter and
into your computer via USB. Now a pop-up window will appear and ask you to
reformat your card. Please note that any data stored on the microSD card will
be deleted during the reformatting process. Click Yes and allow the
reformatting to begin. Once the reformatting is complete, detach card from
adapter and put back into the camera device. If no pop-up appears, as the
microSD is attached via USB, go to the Windows menu and select Computer.
Right-click the removable drive and select Format.
Place the microSD card back into the camera after reformatting and press the
power button.
Spy Tec
www.spytecinc.com
Spy Tec
www.spytecinc.com
15
Specifications
Sensor
3M CMOS Sensor
Solution
Novatek 96650
Lens
fixed focus lens
Zoom
4 x digital zoom
LCD Display
2.7 inch 16:9 TFT LCD
Lens Angle
120 degree ultra wide angle lens
Night Video
Enhanced led lights
Video Output
AV (SVBS): composite TV signal output NTSC/PAL
High definition TV terminal interface: HDMI output
Picture
JPG file format Maximum output pixel: 5.0 Mega Pixels
Video Resolution
1920x1080, 30 fps
1280x720, 60 fps; 848 x 480, 30fps; 640x480p, 30fps
Audio
Built-in Microphone/Speaker (AAC)
Codec MPEG4
G-Sensor Support
Memory
External media: SDHC
(supports 64GB Max, microSD card, NOT Included)
Interface
USB / HDMI / AV / microSD card slot
Motion Detection
Support
Shutter
Electronic shutter
Battery
3.7V 300mAh Poly