Ins-tsshc-3dnpsb-16a-115f-1210 for further information or to consult this guide on line, please visit our web site. Www.Sshcinc.Com “tsshc-3dnpsb-16a-115f” electronic thermostat user’s guide www.Sshcinc.Com.
Ins-tsshc-3dnpsb-16a-115f-1210 2 before installing and operating this product, the owner and/or installer must read, understand and follow these instructions and keep them handy for future reference. If these instructions are not followed, the warranty will be considered null and void and the manufa...
Ins-tsshc-3dnpsb-16a-115f-1210 3 1. Description the tsshc-3dnpsb-16a-115f non programmable electronic thermostat can be used to control electric heating units such as enerjoy radiant ceiling panels, electric baseboards, convectors, or aeroconvectors. It keeps the temperature of a room at the request...
Ins-tsshc-3dnpsb-16a-115f-1210 4 2. Installation selection of thermostat location the thermostat must be mounted on a connection box on a wall facing the heating unit, at around 1.2 m (4 feet) above the floor level, on a section of the wall exempt from pipes or air ducts. Do not install the thermost...
Ins-tsshc-3dnpsb-16a-115f-1210 5 thermostat mounting and connection 1. Cut off power supply on lead wires at the electrical panel in order to avoid any risk of electric shock. 2. Ensure that the air vents of the thermostat are clean and clear of any obstruction. 3. Using a screwdriver, loosen the sc...
Ins-tsshc-3dnpsb-16a-115f-1210 6 5. Take the wires from the wall through the hole at the base of the thermostat and connect them using the supplied solderless connectors. When making the connection with aluminum wire, make sure that you are using connectors identified co/alr. Please note that the th...
Ins-tsshc-3dnpsb-16a-115f-1210 7 3. Operation powering on for the first time when powering on for the first time, the thermostat is initially set to day mode. The temperature is displayed in fahrenheit and is set at 105°f (41°c) by default. Language (english/ french) to switch the display from engli...
Ins-tsshc-3dnpsb-16a-115f-1210 8 backlit screen the backlight screen lights up when you press down a button. If you do not press down any button during 15 seconds, the blacklight screen will turn off. It is possible to turn on the backlit screen without modifying anything by pressing down the (+) or...
Ins-tsshc-3dnpsb-16a-115f-1210 9 day mode and night mode the thermostat includes a day mode (sun) and a night mode (moon), both of them having their own independently adjustable and recorded set point. The ambient temperature is displayed above the set point, in degrees fahrenheit or celsius. When s...
Ins-tsshc-3dnpsb-16a-115f-1210 10 night mode timer adjustment procedure 1. First, switch to the night mode by pressing down the day/ night button and releasing it immediately (press it down twice if the backlit screen is off and once if the backlit screen is on). 2. From the night mode, simultaneous...
Ins-tsshc-3dnpsb-16a-115f-1210 11 automatic mode the automatic mode, which is associated to the night mode timer, allows alternating between the day/night modes and the two corresponding set points over a 24-hour period. Once activated, this mode allows an automatic return to the night mode after 24...
Ins-tsshc-3dnpsb-16a-115f-1210 12 3. Activate the automatic mode by simultaneously pressing down the (+) and (-) buttons for at least 3 seconds. The automatic mode icon will appear. If the automatic mode was already activated, the same procedure should be used to deactivate it. 4. When the adjustmen...
Ins-tsshc-3dnpsb-16a-115f-1210 13 display in degrees fahrenheit/celsius the thermostat can display the ambient temperature and the set point in degrees fahrenheit (standard factory setting) or celsius. Selection procedure for degrees fahrenheit/celsius display. 1. From the day mode, simultaneously p...
Ins-tsshc-3dnpsb-16a-115f-1210 14 programmable heating cycle this setting allows the length of a heating cycle to be adjusted. To activate this programmable heating cycle setting, the ther- mostat should be in day mode and the user must press and hold down the (+) and (-) buttons for 20 seconds. Not...
Ins-tsshc-3dnpsb-16a-115f-1210 15 lock option it is possible to impose a maximum temperature set point by activating this mode. Then, it becomes impossible to exceed this set point, regardless of the current mode. However, it is still possible to lower the set point at your discretion. Procedures to...
Ins-tsshc-3dnpsb-16a-115f-1210 16 fan mode the activation of the fan mode is similar to the celsius/ fahrenheit adjustment. To activate or deactivate the fan mode, you must press down the (+) and (-) buttons simultaneously for at least 3 seconds while in day mode. Once the 3 seconds have passed, the...
Ins-tsshc-3dnpsb-16a-115f-1210 17 parameters saving and power failures the thermostat saves some parameters in a non-volatile memory to be able to recover them after being shut off (a power failure, for example). These parameters are the day/ night settings, the automatization of the day/night modes...
Ins-tsshc-3dnpsb-16a-115f-1210 18 4. Troubleshooting n.B. If you are unable to solve the problem after having verified these points, please communicate with our customer service. Problem solution the thermostat is hot. In normal operating conditions, the thermostat housing can reach nearly 104ºf (40...
Ins-tsshc-3dnpsb-16a-115f-1210 19 5. Technical specifications supply voltage : 90 vac to 240 vac, 60 hz maximum electrical current with a resistive load : 16 a 3840 w @ 240 vac 3330 w @ 208 vac 1920 w @ 120 vac temperature display range : 37°f to 140°f (3°c to 60°c) temperature display resolution : ...
Ins-tsshc-3dnpsb-16a-115f-1210 20 limited warranty this unit has a 1 year warranty. If at any time during this period the unit becomes defective, return it to its place of purchase with a copy of the invoice, or contact our customer service department (with a copy of the invoice in hand). In order f...
