- DL manuals
- SSSI
- DVR
- Black1600Neo
- User Manual
SSSI Black1600Neo User Manual - page 15
14
2004/01/01
00:00:00
>
⊙ Go to Search Mode
• Press search button and Log-In.
(as administrator or manager )
• Use directional keys to navigate search menu.
• To open/ advance each sub menu, Press enter
• To return to a previous menu screen, Press return.
( Repeatedly pressing return will exit out of all menus.)
1. Search by Time
- Search by a recorded Date/ Time
① Move cursor to select the date on the calendar.
② Press enter to open selected date.
③ Recorded timeline will appear.
④ Move cursor to the specific time, and press enter.
(The timeline is divided into 15 minutes segments)
⑤ Menu will be hidden from view, and playback will
start playing from the selected date/ time forward.
• The recorded date & time is shown on the status bar.
• The current playback mode (Play, Pause, FF, REW)
is indicated with on icon on the bottom-right of the screen.
• The channel selection and display buttons will work the
same as in live view mode, setup, PTZ and archiving
buttons don’t work in the playback mode.
4. Search
Summary of Black1600Neo
Page 1
0 standalone dvr user’s manual dvr-black4neo dvr-black800neo dvr-black1600neo revision date : oct 2006.
Page 2
1 • contents • chapter 1. Specification & system organization 1. Product contents list -------------------------------------------------------- 3 2. System organization --------------------------------------------------------- 4 • chapter 2. Product description 1. Dvr-1600neo / 800neo front panel---...
Page 3
2 • index • chapter 5. Setup ⊙ go to menu -------------------------------------------------------------- 16 ⊙ go to system setup -------------------------------------------------------- 16 1. Display ------------------------------------------------------------------ 17 2. Camera --------------------...
Page 4
3 1. Product contents list please confirm the contents when open package. ① basic contents remote controller user’s manual remote client program install cd aaa battery x 2 power cable ② option contents hdd cd-rw usb memory 1. Specification & organization.
Page 5
4 2. System organization network camera #1-8(16) alarm sensor #1-8(16) relay out vcr vga monitor av monitor remote client pc image printer video in video out tcp/ip alarm input/out remote controller cd-rw (it is not supported on dvr-black4neo) backup avi backup web client usb 1. Specification & orga...
Page 6
5 2. Description (dvr-black800neo/1600neo) • channel selection button is prior to display. • when remote controller sensor input is blocked by something, it cause 1 remote controller do not work properly. • when press any button, it operate with beep sound. Tip 1. Front panel 1 2 3 4 11 12 9 8 7 6 5...
Page 7
6 2. Description * shortcut button 1 2 3 4 9 8 7 6 5 display : select screen division mode or rotation mode. Seq : select sequence screen mode. Panic : urgent recording as setup. Zoom : digital zoom on live or playback image lock : front panel lock button (default password: 1234) when locked, “lock”...
Page 8
7 • do not power on the unit all cable connections have been made. 2. Rear panel 2. Description tip 1 2 3 4 7 6 5 video in / loop : bnc video input port/ loop output (1-8/16) 11 12 9 8 10 13 monitor out : bnc main monitor output. Svhs : s-video main monitor output. Spot #1 ~ #4 : 4x bnc output to in...
Page 9
8 1. Front panel • power button is soft style to prevent system failure by wrong operation. • channel selection button is prior to scr mode. • when remote controller sensor input is blocked by something, it cause 1 remote controller do not work properly. • when press any button, it operate with beep...
Page 10
9 2. Rear panel 2. Description • when system installation, please install under system power off status. • please use specific adaptor when power supply. Tip 2 4 7 5 12 9 8 10 13 1 3 6 11 video in : bnc port for connection of dvr & camera. (4 camera connectable) loop back : output dvr camera video t...
Page 11
10 power system on/off menu : open system setup menu return cancel / deselect previous screen enter : apply / select /go to next sereen channel selection buttons change display mode search menu ptz/iris mode • there are buttons on the controller that are unused, and their descriptions have been omit...
Page 12
11 1. System power on • press power button to start system. • after checking hard disk, display mode is shown. 1 • initial screen view mode is quad division mode and recording mode. 3. Display • check system status leds power : indicates system (on/off) record : indicates recording (on/off) network ...
Page 13
12 3. Display mode • user can select from a variety of multi-screen display modes (1/4/6/8/9/13/16ch) • the initial display mode is set to either 8ch or 16ch mode. 3. Display 2. Screen view selection • select one channel using the channel selection buttons (1-8/16). • use the display button to chang...
Page 14
13 3. Display • each ptz function is manipulated by using a button on the front panel or on the remote controller. • some of the notations on the ptz menu are abbreviated. (p: pan, t: tilt, z: zoom, f: focus, i: iris) • all of the functions on the ptz menu are labeled along with the front panel/ con...
Page 15
14 2004/01/01 00:00:00 > ⊙ go to search mode • press search button and log-in. (as administrator or manager ) • use directional keys to navigate search menu. • to open/ advance each sub menu, press enter • to return to a previous menu screen, press return. ( repeatedly pressing return will exit out ...
Page 16
15 • video playback controls ① : basic playback mode (normal speed (1x) forward playing) ② : normal speed (1x) backward playing ③ : pause playback (enable the jog wheel) ④ : fast forward (2x ~ 64x speed) ⑤ : fast rewind (2x ~ 64x speed) ⑥ : variable ff/rew speed, same as # ④ ⑤ ※ use jog or press nor...
Page 17
16 ⊙ go to setup ① press setup button. ② unit will ask for login/password entry. ③ input password using by channel selection button. ④ after login, select a submenu and press enter. • the initial password for the admin account is 1234. • on-screen display will show the password digit as : **** • to ...
Page 18
17 1.Display - allows configuration of display properties • status bar : recording mode icon (on/off), (recording: red, pre-recording : green) • camera title: show/hide camera name (on/off). • event icon: show/hide event icon (on/off). • border : show/hide border grid (on/off) in multi-channel mode....
Page 19
18 5. Setup • sequence dwell : set up channel sequence cycle time (1-60 sec). • spot-out dwell : setup spot-out time cycle(1~60 sec.). • de-interlace mode : remove interlacing in high resolution & low frame. * this applies only d1 resolution. (704x480) • alarm pop-up mode: alarm channel will go full...
Page 20
19 • activation : setup activation on/off. • list : sequence title. • created by user who programmed the sequence. 1-3. Sequence • choose add to add sequence. • input the sequence title. • choose activation. (on/off) • save and exit 5. Setup ① press enter, then red border line will disappear. Setup ...
Page 21
20 5. Setup 1-4. Spot out • channel : select spot out channel (4ch=> 1 spot, 8ch=> 2 spot, 16ch=> 4 spot) • select camera channel for spot out • user can see the selected channel via av monitor.
Page 22
21 2. Camera - allow setup of camera parameters and options 2-1. Camera title • covert : setup channel as covert channel (on/off) => what’s covert? When a channel is set to covert, it will be hidden live view and playback, but video will still be recorded. • title : user will input camera name by us...
Page 23
22 ※ how to use virtual keyboard • input the directional buttons to select keys on the virtual keyboard. • press enter to press a key on the keyboard. • press the button for shift for caps and punctuation. Tip 2-3. Ptz setup • address : select the ptz camera address (0-255). • ptz protocol : select ...
Page 24
23 2-4. Motion detection • move cursor over grid using the directional keys. • press enter, and then use the directional keys to select an area of targets on the grid. • press enter aging to mark the selected area. ( an area that is already marked will be unmarked) • adjust the motion sensitivity le...
Page 25
24 3. Sound 3-1. Audio - allows for configuration of audio parameters and options • live audio : audio output to audio out terminal (on/off). (live audio output is from audio in terminal) • audio monitoring channel: select channel for audio output. • network audio tx: allow transmission of live audi...
Page 26
25 • time zone setup : choose the time zone (relative to gmt standard). ※ how to perform date/time setup via network (ntp) time server ; 1. Setup time zone for your geographic location. 2. Setup the network time server information and press the “ sync” button. 3. If correct time is not retrieved aut...
Page 27
26 4-2. Network • ip address : input the unit ip address. • gateway : input the ip address of internet-connected router • subnet mask : input the subnet mask ip. • dns server: input 1 st and 2 nd dns server ip addresses. • ddns server: input ddns server ip address • net client port : input net clien...
Page 28
27 4-3. Mail these settings allow the dvr to send outgoing e-mail notifications to the list of recipients listed within the dvr • server: setup the outgoing mail server address. • input the server address using the virtual keyboard. • port: mail server port number (default is port 25). • security: f...
Page 29
28 4-4. User management dvr user account setup • there are 3 groups of user account types - administrator, manager, and user. • a total 7 users can be established for each account type. • input the new user id, • input a password, using channel selection buttons (0-9) • choose the group which the us...
Page 30
29 4-5. System management • f/w version: dvr server firmware version. • h/w version : dvr hardware version. • video signal type: ntsc or pal. • disk capacity: used hdd capacity/ total hdd capacity. • ip address: current ip address of the dvr. • mac address: fixed mac address of the dvr. 5. Setup • f...
Page 31
30 5. Event/sensor 5-1. Hdd event • drive: all hdds are listed by ide channel number. • smart alarm: set temperature alarm (on/off) • check interval: time between smart alarm checks. 5. Setup 4-6. Control device • system id : select system id. (1~254) • protocol : select protocol. • baud rate : setu...
Page 32
31 5-2. Alarm input 5-3. Alarm output ※ setup each channel when alarm, video loss, motion happened. • channel : select channel. • mode: setup reacted relay as latched/transparent mode. • type: setup relay type n/open or n/close. • operation: setup relay connect with alarm sensor. • duration: setup r...
Page 33
32 5-4. Buzzer out • operation: buzzer out (enable/disable). • mode: setup in latched/transparent mode (same as alarm out). • hdd event: turn buzzer (on/off) when hdd event occurs. • duration: buzzer time (5sec~5min or manual reset on dvr) • setup each channel to trigger buzzer on alarm activation, ...
Page 34
33 5-5. E-mail notification 6. Disk management 5. Setup • e-mail notification will send an e-mail to a list of recipients, based on alarm, video loss, motion, or hdd events. • check or uncheck each type of condition that you want to trigger an e-mail notification, on each channel. • the list of reci...
Page 35
34 ⊙ go to record menu 1. Recording operations • press the setup button and login as an administrator. • choose “ record menu” 5. Setup • schedule mode: choose ‘daily’ or ‘weekly’. - daily : the recording schedule that you configure will be used for every day of the week. - weekly: you must configur...
Page 36
35 5. Setup 2. Continuous / motion record schedule 2-1. Parameter 2-2. Schedule • select a block of time from the 0-24hr timeline (you may select multiple blocks). • press enter again to set up the resolution, fps, quality, and audio on each channel. • continuous recording icon • motion recording ic...
Page 37
36 5. Setup 3. Alarm recording schedule 3-1. Parameter 3-2. Schedule • alarm recording icon 29 • select a block of time from the 0-24hr timeline (you may select multiple blocks). • press enter again to set up the resolution, fps, quality, and audio on each channel. • select an area (channel / time o...
Page 38
37 4. Panic setup 5. Setup • to setup each channel, press enter. • setup each channel. (size, fps, quality, audio) • by using panic button of front panel can record urgently as setup..
Page 39
38 ⊙ go to archiving • device : indicate cd-rw model and usb memory model automatically. If you use the cd-rw and usb memory (or usb hdd) together, it can choose the cd-rw and usb by direction key. • from : select start backup time. • to : select end backup time. • mode : select backup mode. (burnin...
Page 40
39 • jumper setup as master or slave, following the ` direction of surface of hard disk. • jumper located at hard disk data cable or 1 rear side of hard disk. • if one hard disk installation, setup as master if two hard disk installation, second one setup as slave. ① jumper setup as master or slave ...