SSV Works SS-FKP652 Installation Manual - page 3
SS-FKP652
For proper sound, ensure the speaker polarity is correct connect the “+” to the “+” and the “-“to the “-“from the speaker wire to the amplifier. If using
with an SSV Works complete system refer to the amplifier wiring instructions for more detailed wiring information.
© 2017 SSV Works, Oxnard, CA 93030 SS-FKP652 Rev. C 4-11-17
E. Loosen the screws for the 2 mounting brackets on the
enclosure and place into the cage.
G. Attach the “J” bracket to the underside of the enclosure, be
sure the bracket hooks tight around the cage bar, then tighten.
H. Route the speaker wire away from any moving parts and any
sharp metal, then connect to the amplifier.
E
G
H
B. Mount the enclosure brackets into the vehicle using the M6 screws provided,
once the brackets are tight to the cage, re-tighten the brackets to the enclosure.
F
F
WIRING INSTRUCTIONS
“+”
“+”
“-”
“-”
Amplifier