En suunto combos and mechanical instruments instruction manual combo consoles i console compasses cb-71/std and cb-71/ds depth gauge sm-16 i pressure gauge sm-36.
2 suunto combo consoles introduction the suunto combo consoles for recreational use, allow you to create a personal combo according to your own specifi c needs. Analog gauges, dive computers and compasses fi t together like building blocks. The combos consist of four main modules: the pressure gauge...
3 assembling the combo modules 1 2 5 (5) 4 (3) 3 1. Cb-one module front cover with sm-36 pressure gauge in place (see section cb-one module assembly) 2. Cb-in-line module front cover 3. Cb-end piece or cb-71/std compass (optional) 4. Cb-in-line module back cover with instrument 5. Cb-one module back...
4 cb-one module assembly the cb-one module is designed to fi t the suunto sm-36 analog pressure gauges. Before assembling the cb-one module the hose cover needs to be fi tted on the pressure hose. The hose cover ensures that the sm-36 pressure gauge fi ts properly on the cb-one module. If the suunto...
5 cb-one module assembly when using the suunto quick release if the suunto quick release (qr) is used the hose cover should be attached on the high pressure hose below the female end of the qr. The male part is attached to the pressure gauge which is then fi tted onto the cb-one front cover accordin...
6 suunto console compasses cb-71/sk-7/std and cb-71/sk-7/ds the cb-71/sk-7 is available in two versions: the cb-71/sk-7/std for attachment on top of the combo modules or the cobra dive computer, and the cb-71/sk-7/ds for attachment on the back side of the cb-one module. Compass use for divers genera...
7 • sand ripples usually form long lines parallel to the shore. • the direction of currents should be noted by their effect on algae or drifting particles. Use the compass to check the bearing of the current. • in shallow water, the sun’s direction can be seen from shadows on the bottom, or by looki...
8 suunto mechanical gauges suunto depth gauge sm-16 models available: 45 m, 70 m, 150 ft, 230 ft suunto pressure gauge sm-36 models available: 300 bar and 4000 psi before usage depth gauge: before diving, check the position of the depth indicating pointer. Atmospheric conditions (altitude, temperatu...
9 immovable object. Do not subject the gauges to pressures beyond their maximum range. Temperature extremes can be damaging. In general, the gauges should not be exposed to temperatures to which you would not expose yourself. Caution! After use, rinse the gauges or the console with fresh water and s...
10 operating and storage temperatures sm-16 operating temperature 0° c to 40° c [32° f to 104° f] storage temperature -20° c to 50° c [-4° f to 122° f] sm-36 operating and storage temperature 0° c to 40° c [32° f to 104° f] technical specifi cations the suunto depth gauge sm-16 complies with the pre...
11 suunto limited warranty suunto warrants that during the warranty period suunto or a suunto authorized service center (hereinafter service center) will, at its sole discretion, remedy defects in materials or workmanship free of charge either by a) repairing, or b) replacing, or c) refunding, subje...
12 limitation of liability to the maximum extent permitted by applicable mandatory laws, this limited warranty is your sole and exclusive remedy and is in lieu of all other warranties, expressed or implied. Suunto shall not be liable for special, incidental, punitive or consequential damages, includ...
Suunto help desk global +358-2-284-1160 usa (toll-free) +1-800-543-9124 canada (toll-free) +1-800-267-7506 www.Suunto.Com © suunto oy 11/2005, 09/2006, 11/2011. All rights reserved. Suunto is a registered trademark of suunto oy..
