Suzuki 2010 Kizashi Owner's Manual - page 71

2-52

BEFORE DRIVING

57L20-03E

54G184

4) Push the child restraint toward the

anchors so that the connecting bar tips

are partially hooked to the anchors.

Use your hands to confirm the position.

54G185

5) Grasp the front of the child restraint and

push the child restraint forcefully to

latch the connecting bars. Make sure

they are securely latched by trying to

move the child restraint system in all

directions, especially forward.

6) Return the seatback if folded. Attach

the top tether strap, if applicable.

Installation of Child Restraint with 

Top Strap

57L21048

Some child restraint systems require the

use of a top strap. Top strap anchor brack-

ets are provided in your vehicle at the loca-

tions shown in the illustrations. Install the

child restraint system as follows:

1) Secure the child restraint on the rear

seat using the procedure described

above for securing a restraint system

that does not require a top strap.

2) Open the cover that is marked with the

anchor bracket symbol to access the

anchor bracket. Close the cover when

not using the anchor bracket.

3) Hook the top strap to the anchor

bracket and tighten the top strap

according to the instructions provided

by the child restraint system manufac-

turer. Be sure to attach the top strap to

the corresponding anchor located

EXAMPLE

WARNING

The seatback should always be

securely latched in a fairly upright

position when any type of child seat

is installed. An unlatched or reclined

seatback will reduce the intended

effectiveness of the child restraint

system.

EXAMPLE