Sven DRIFT Operation Manual - Eng
• Choose Vibration test (Fig. 9) to check and set
vibration feedback:
ǔ) Moving cursor in Vibration strength increases or
reduces force of vibration feedback, for example, in
ԛg. 9 vibration feedback is 85 %;
b) Pressing buttons Left force, Both force or Right
force allows to check vibration feedback (Fig. 9);
c) After setting and checking, press Conԛrm in the
bottom of the window.
NOTE! Games supporting Force Feedback can
have further setup of feedback in different
situations: crashes, collisions against obstacles
or road signs etc. For further setup it is neces-
sary to make corresponding adjustments in the
setup window against Stick Volume, Road
Effects, Collision, Engine etc.
• Switching modes. Game racing wheel is equipped
with MODE button k for switching between Digital/
Analog modes, i.e. switching from Digital to Analog
mode and vice-versa. When in Digital mode the
wheel is turned and pedals are pressed, there is
static maximum switching ON/OFF of correspon-
ding axes, i.e. there is only ON/OFF position. In
Analog Mode the signal is sent dependent on
steering angle of the wheel and extent to which the
pedal was pressed, i.e. smoothly.
• Operation without pedal unit. Game racing wheel
is equipped with paddle shifters f, that substitute
acceleration and brake pedals: the left paddle
shifter functions as a brake pedal, while the right
paddle shifter functions as an acceleration pedal.
Fig. 8
Fig. 9
ENG
5