Sven PS-35 Operation Manual - Eng
ENG
3
Operation Manual
PS-35
a
b
c
d
e
f
Fig. 1. Аctive speaker
6. DESCRIPTION OF CONSTRUCTION
aVolume control wheel
bPower LED
cRotary mechanism
dUSB: USB port (power supply)
eAUX: Audio source input
fL OUT: Active speaker output
gPassive speaker input
hBattery compartment
iON/OFF:POWER switch
jBattery compartment cover
Fig. 2. Passive speaker
Fig. 3. Active speaker
bottom view
7. CONNECTION AND OPERATION GUIDE
SVEN PS-35
Multimedia Speaker System (MSS) can be connec-
ted to a USB-port on your computer or laptop (see Fig. 4).
• Connect the speakers to each other using the acoustic cable
as shown in Fig. 4.
• Insert the mini-jack of the signal cable (included) into active
speaker AUX f , and connect the opposite mini-jack of the
signal cable to LINE OUT port of the PC sound card or OUTPUT
of МР3/CD-player, as shown in Fig. 4.
• Plug the USB-cable to the USB-port on your computer or
laptop. (see. Fig. 4).
• MSS power supply is also possible by using batteries.
Batteries installation
• Open the battery compartment (see. Fig. 3).
• Put in batteries (3 AAA type batteries – not included).
• Close the battery compartment.
Notes:
• Never use both USB and batteries power supply together.
• Don’t rotate the mechanism of speaker transformation
more than 180°!
• Adjust volume level to its minimum by turning the volume
control wheel a counterclockwise until it stops.
• Shift the ON/OFF slide switch i on the active speaker bottom
panel. Power LED b will illuminate.
• Switch on the audio source and adjust MSS volume level by
the volume control wheel a or by Windows tools at your
discretion. While turning the wheel clockwise a, volume level
increases, but while turning it counterclockwise, it reduces.
g
h
i
j