Sven PS-35 Operation Manual - Eng
ENG
4
Notes:
• Place the speakers symmetrically to the listener.
• Connect the speakers to a USB port of your laptop or PC, otherwise please use active
USB-hub.
• After turning off the computer or laptop unplug the USB device.
8. TROUBLE SHOOTING
• If there is weak sound or there is no sound of the speakers, please make sure that the USB cable
is plugged to the Laptop or PC and it is powered on. If power is supplied by batteries, make sure
they are inserted into the battery compartment. If the batteries are discharged, replace them with
new ones.
• If the sound is produced by one of the speakers only, check the connection of the speakers.
Value
6 (2 × 3)
80 – 20 000
Ø 50
5DС/USB
75 × 70 × 65
0.372
Parameter, measurement unit
Output power (RMS), W
Frequency range, Hz
Speaker dimension, mm
Power supply, V
Dimensions (one satellite) (W × H × D), mm
Weight, kg
9. TECHNICAL SPECIFICATION
Notes:
• Technical specification given in this table is supplemental information and can not give
occasion to claims.
• Technical specification is subject to change without notice due to improvement of SVEN
production.
USB
AUX
L OUT
Signal cable mini-jack to
mini-jack (included)
Acoustic cable
(included)
USB power cable
(included)
CD
PC
MP3-player
Fig. 4. Connection diagram
Active speaker
Passive speaker