Sven SPEEDY Operation Manual - Eng
Fig. 4
Fig. 5
Fig. 6
7. CONNECTION AND INSTALLATION
• Install the device on even surface (for
example, on a table) on its 5 suction caps.
• Connect pedal unit to the device (Fig. 3) via
cable q of the pedal unit to RJ-11 jack p, then
connect USB cable q of the device to the USB
port of the computer.
• Insert Software CD disk into the disk drive of
your PC and launch setup.exe to install drivers
on your PC. There should automatically appear
Game Controller window on the your PC (Fig. 4).
Also, there will open up icon LS-USBMX 1 2 3
Steerin... (Fig. 5) which is convenient for further
adjustments.
• Press Test (Fig. 4), and there will appear
LS-USBMX 1/2/3 Steering window (Fig. 6) on
the display of your PC. Here you can make main
settings of axes and keys.
• Choose «Controllers Function» to set axes and
keys (Fig. 7).
Setting of axes and keys (not compatible with
OS Vista 64):
– Dead Zone Setup: controller will not respond
to a slight touch of acceleration pedal (Accele-
rate Y+), or brake pedal (Brake Y-), or turns of
the wheel (Steering X), therefore necessary
adjustments should be made by cursors (Fig. 7);
– Sensitivity Setup: the higher sensitivity is, the
swifter and more efficient response of controller
to pressing of pedals and turns of the wheel will
be, therefore if it is necessary adjustments
within Lower to Higher range should be made by
cursors (Fig. 7);
– KeyMap Setup reprograms functional keys:
there should be chosen new necessary assign-
ment against the key designation (Fig. 7);
4