Sven SPEEDY Operation Manual - Eng
8. TROUBLESHOOTING
Problem
After installation of the software,
game controller does not work
normally.
Driving program can’t be
installed on your PC or the test of
controller has no response after
installing it.
Motors have no vibration
function in a racing game.
After entering game, some
analog axis will automatically
operate.
After entering the game,
vibration feedback operates
automatically.
During the game vibration
feedback is insufficient.
Solution
А. Check whether the controller’s link cable is strongly
connected to PC.
B. Make sure that status indication for Game Controller after
installation is Confirm.
C. Check whether controller’s settings have no conflicts with
other peripherals’ settings.
D. Restart your PC, if the controller still doesn’t work
normally.
DirectX version is too low. It requires version 7.0 and up.
After exiting the game, disconnect the controller from the
USB port and connect it again. If it still can’t work normally,
please restart the computer.
Calibrate and adjust the dead zone axes.
Enter Force Feedback and calibrate it.
Enter Force Feedback and set force of feedback.
If none of the above mentioned solutions removes the problem, please refer to nearest authorized
service center for consultation by qualified specialist. Never try to repair the device on your own.
Dead Zone
Effect Zone
Effect Zone
Axes
Axes
6