Sven X-PAD AERO Operation Manual - Eng
6
If none of the above mentioned solutions removes the problem, please consult a nearest
authorized service center. Never try to repair the device on your own.
8. TROUBLESHOOTING
Problem
The joystick does not work
normally after installation of
drivers on the PC.
Drivers can’t be installed on the
PC.
Some analog axis goes into
effect automatically.
After connecting the joystick, its
driving program can’t be found.
After entering the game,
vibration feedback function
operates automatically.
During the game vibration
feedback is insufficient.
Solution
А. Check whether joystick is connected properly to your PC.
B. Make sure that all the settings in Game Port Controller are
installed and confirmed.
C. Check whether the settings of the joystick are in conflict
with the other peripherals.
D. Restart your PC if the device still does not work normally.
Install DirectX 7.0 or higher.
The gamepad hasn’t been calibrated or the calibration hasn’t
been confirmed.
Enter My computer → Properties → Hardware → Device
manager and delete corresponding equipment with «!» mark
and reconnect the gamepad to the PC. Then your PC will find
the driving system.
Enter Force Feedback and calibrate it.
Enter Force Feedback and set the force of feedback.