SVT 3100 User manual

Summary of 3100

  • Page 1

    Svt-3100 access control card reader (svt19100) user manual please read this user manual prior to installing the system, and keep it well for future use..

  • Page 2

    -1- 110 mm 100 mm 110 mm 38.5 mm no. Description mode indicator infrared receptor applicable card type id/ic card card capacity: maximum 1000 sensing distance 2cm sensing time 0.8s technical parameters ambient temperature -20 +60 relative humidity 95% standby current 90ma operating voltage dc 14.5v ...

  • Page 3

    -2- hatch install in to the wall screw hole screws screw anchors screws screws (fix with rain cover) rain cover wall hole 105 mm 96mm 50mm (fix with button case) installation (without the rain guard) installation (with the rain guard).

  • Page 4: Wiring Connection

    -3- wiring connection 485 no com nc purple white connect to main board module p8(4+2) connect to main board module j1 connect to main board module p3(4+2) unlock button connect to access control keypad lock power supply dc 14.5v red black note: if it is used as stand alone system, disregard the wiri...

  • Page 5: Operation

    -4- operation svt-3100 access control card reader require s the svt remote control for programming. In the setting mode: press 8 with a di sound, then enter new 4-digits code (xxxx) and #. After a di sound, re-enter the new 4-digit code and #. If two di sounds is heard, it means the modification is ...

  • Page 6

    -5- in the setting mode: press 1. Di sound indicates it is in the adding user card mode. Enter the last 6-digits of a new card number. If di sound is heard, it indicates the adding is successful. Or swipe the new card instead of adding the card numbers. If a di sound and another di sound are heard, ...

  • Page 7

    In the setting mode: press 3, a di sound is heard. Enter 6 digits (4-digits building number and 2-digits machine number), press # with a di sound. It indicates the setting is successful. Press * to return to standby mode. No operation in 30 seconds will return automatically. Set building number and ...

  • Page 8

    The design and specifications of this user manual can be changed without any notification to the user. All copyright and interpretation rights are reserved to svt innovations inc..