SVT Innovations SVT-2 User Manual - How to Set The Slave
An indoor monitor can be assigned as Guard Unit indoor monitor; when the
Guard Unit Indoor Monitor answers the call and the conversation with the guard
person starts.
Use code 8004 to set the indoor monitor as a guard unit and 8005 to cancel this
function.
How to set the monitor as a Guard Monitor
How to set the slave
indoor monitor address
This feature allows a maximum of 4 indoor monitors to act as a group in one system,
and must be programmed with the same user code (single family or apartment system);
refer to the user code settings for additional information. The first indoor monitor must
be programmed as master and the others must be programmed as slave monitors:
The code of 8000 is used to set the master monitor.
The code of 8001 is used to set the first slave monitor .
The code of 8002 is used to set the second slave monitor .
The code of 8003 is used to set the third slave monitor .
How to set the
indoor monitor panel ON
In default mode, when receiving a call, all masters and slave indoor monitors will
ring at the same time. The system allows up to 4 indoor monitors to display the image
when a call is received at the same time. To program this setting, just input the code
8006 on each indoor monitor.
You may set up the sate & time different ways:
The code number of 8008 is used to set the date format as month/date/year
The code number of 8009 is used to set the date format as date/month/year
The code number of 8012 is used to set the time format as 12 hour system
The code number of 8013 is used to set the time format as 24 hour system
How to set date and time format
-11-