SVT Innovations SVT-2 User Manual - Unlock 2Nd
1. During talking state, Press UNLOCK Button or touch
icon to open the door
for the visitor.(if two locks are connected to door camera,touch
unlock 2nd
icon to release the second lock )
2.
When the monitor is in standby mode, press TALK/MON button, The screen can
display the view of outside. Or touch
Monitor icon on main menu to get into the
door camera switching mode, if multi outdoor stations are installed, you can press the
door 1/2/3/4 to monitor the door station or CCTV camera you want. Press
icon to exit and enter into the main menu screen.
Note: if the system is connected to a SVT-2 AC31 camera throught a SVT-2 SCU ,
press the camera 1/2/3/4 to monitor the camera you would like. Press icon to
exit and go back to the main menu screen.
5. Intercom Function
1.
Inner Broadcast
: If multi slave indoor monitors are installed in the same system,
(either single family or apartment system), select Inner Broadcast, and all indoor
monitors will automatically receive broadcast content at the same time.
2.
Inner Call
: If multi slave indoor monitors are installed in the same system (either
single family or apartment system), select Inner Call, and all the other indoor monitor
-3-
3.
4.
Touch Intercom icon on main menu to get into the intercom mode, then select one of
the following: Inner Broadcast, Inner Call, Name List Call and Call Guard Unit.