SVT Innovations SVT-MF4 User Manual - page 16
-14-
8.How to set up the user codes
SVT-MF4 Outdoor Station D
requires the SVT Remote
Control for programming.
SVT REMOTE CONTROL works as a remote access control.
It is required to program the SVT-4 Outdoor Station D
settings, as registering and deleting fingerprints, unlocking
time and fingerprint security level.
SVT REMOTE CONTROL
Use two AAA alkaline batteries
Sensor
working distance: +/- 20cm
Modify access control password
Press * and #, enter XXXX(the administration password) and #. A Di
sound indicates in the setting mode. Press * to return to standby
mode. (No operation in 20 seconds will return automatically). The
factory default password is 4567.
In the setting mode
In the setting mode:
Press 8 with a Di sound, then enter new 4-digits password (XXXX)
and #. After a Di sound, re-enter the new 4-digit password and #. If
two Di sounds is heard, it means the modification is successful.
If enter different passwords twice, continued Di... sound will be
heard, the modification of password fails. Please modify again.
Press * to return to standby mode.
If forget password, turn on the power again and press # for 3
seconds. If Bi is heard, default password is restored.