SVT Innovations SVT-SMART 500 User Manual - Operation Tips
-17-
Picture 2-6
Remote control address - use to control multi SVT-SMART systems with one remote
control while the address of the remote control is the same as the code of the
machine.
Equipment name - equipment alias.
Date mode - choose format of date display
Time mode - display mode choice, including 24 hours and 12 hours.
System date - real-time system date.
system time - real-time system time.
DST - choose according to the requirement.
Network validation - when connect to the public network, time can
be adjusted by the network.
modify time - confirm system time modification.
3.. System settings
3.1 Time code (picture 2-6)
Time / date adjust:
1.. remote control operation: after choose the option, press keyp
to enter.
2. Keypad
2.. Keypad control operation: after choose the option, pre
OK and pops up the time control as picture 1-10 and 1-12.
Choose time by move up and down and confirm the choice.
Set Time
e: after the t
to confirm the new
Notice: after the time is set, choose
Notic
setting.