Swagelok TUBE FACING TOOL User Manual - page 3
– 2 –
SAFETY PRECAUTIONS
The following is a list of general safety guidelines to be considered when operating this tool.
Standard safe machining practices should always be observed when operating this tool.
Before operating this tool, read this User’s Manual completely.
Inspect tool, cord, and accessories for damage prior to operating.
Safety guards have been installed for your protection.
DO NOT OPERATE TOOL WITHOUT
SAFETY GUARDS IN PLACE.
The motor should always be disconnected from the power source whenever servicing the unit or
changing cutting inserts, collets, or other components.
Refer to the operating/instruction manual for specific safety and operating instructions for the motor
included with this tool.
SAFETY INFORMATION
WARNING!
MOVING PARTS.
Keep hands, loose clothing, and long hair away from rotating or moving
parts. Unplug equipment prior to adjusting or servicing. Serious injury can occur.
WARNING!
ELECTRICAL SHOCK.
Read all enclosed safety instructions
and manuals prior to operation.
WARNING!
KEEP DRY.
Equipment and components are not waterproof.
WARNING!
FIRE OR EXPLOSION.
Do not use equipment in a combustible
or explosive atmosphere.
WARNING!
EYE PROTECTION.
Eye protection must be worn while operating
or working near the equipment.
CAUTION!
EAR PROTECTION
. Ear protection may be required if operating or working near
the equipment for prolonged periods of time