T&C TC54 Instructions Manual - page 6
060906-16 TC54.NG02.C
4. Apply a small amount of pipe joint compound to the threads of
the propane burner orifi ce (marked #43) to ensure a good seal,
before screwing it into the fi tting. (Fig. #13)
5. Open shutter fully. (Fig. #14)
6. Reinstall the manifold to the lower burner using the screws previ-
ously removed.
7. Remove the screw securing the upper burner to the grate
assembly. (Fig. #15)
8. Using a 1/2” wrench, undo the natural gas burner orifi ce, (marked
#28). (Fig. #16)
9. Apply a small amount of pipe joint compound to the threads of
the propane burner orifi ce (marked #43) to ensure a good seal,
before screwing it into the fi tting.
10. Open shutter fully.
11. Reinstall the upper burner to the grate assembly and secure in
place using the screw previously removed.
Fig. #13
Fig. #14
Fig. #15
Fig. #16
6