• The RTR-601 Series Units function as Remote Units. They require Base Units to carry out wireless communication. Before getting ready and setting
up the Remote Unit, make sure to first get ready and setup the Base Unit(s).
• To use RTR-601 Series Units, it is necessary to make operation settings via the software "
. Please
download the software and manual from the T&D Website. [HOME > Support > Downloads > Software or Manuals]
• To carry out setup of RTR-601 Series Units, a Battery Charge Dock with USB communication function “RTR-6BD” (sold separately) is also necessary.
measurement is recorded.
Out of Range: Red LED will blink. Within Range: Green LED will blink.
recorded into the RTR-601.
Press to enter the settings menu or confirm a setting.