T'nB BTHFO2 Oreillette Instructions Manual - page 11
- 11 -
U
SE
To use the headset, it first must have been paired with your phone (cf
previous paragraph "To pair the headset with your telephone").
• To make a call:
1) make sure that the phone you want to use and the headset are paired.
2) Dial the number and start the call from your phone.
• To receive a call or hang up:
Press the call button (2) on the headset once.
• To redial the last number
(this function varies depending on the phone model):
Press the "Volume +" button (4) for 3 seconds.
• To make a call using the voice recognition function (only for phones
with voice recognition):
1) make sure that the phone and headset are paired.
2) Press the call button (2) on the headset. you will hear a beep.
3) Say the name of the person you want to call (see your phone manual).
• To reject an incoming call:
Press the call button (2) on the headset for approximately 3 seconds until
you hear a short beep.
• To adjust the volume:
Press the "Volume +" button (4) to increase the sound. Press the "Volume -"
button (5) to reduce the sound.
• To mute/unmute the microphone:
Press the "Volume - " button (5) on the headset for approximately 3
seconds until you hear a short beep.
The BTHF02 headset supports multipoint technology, which allows you
to use the headset with two different Bluetooth mobile phones (cf
paragraph "To pair the headset with a 2
nd
phone").
T
O PAIR THE HEADSET WITH A
2
ND
PHONE
Once the main phone has been paired, you can pair a 2
nd
phone:
1) Turn on the headset by pressing the on/off button on the headset (1).
2) Press the "Volume - " button (5) for approximately 3 seconds until the
red and blue LED's flash. The headset is now in pairing mode.
3) Turn on your second phone's Bluetooth function and start the device
search (see your phone's instructions).
4) Select the BTHF02 headset from the list of devices offered on the
phone.
5) Depending on the model, the phone connects automatically, or enter
the password 0000.
The headset is connected to the 2
nd
phone.
you can manage incoming calls simultaneously on both phones.
• To make a call:
The headset supports the call on the last phone used. Use the 2
nd
device's controls to make a call from the 2
nd
phone.
• To place a call on hold on the 1st phone and answer an incoming call
on the 2
nd
phone:
Press the "Volume +" button (4) for 3 seconds. you pick up the call on
the 2
nd
phone while the call to the 1st phone is put on hold.
• To end a call in progress and retrieve the call on the second phone:
Press the call button (2) on the headset. The current call is completed
and you switch automatically to the call on the second phone.
new use BTHF02_toflashat100% 29/10/12 16:37 Pag